Search
-
Choose the product options first
California Warning: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.
DIAMETER - 3/16"
TOP LENGTH - 7/16"
LOWER LENGTH - 1-1/4"
MATERIAL CONTENT - All Aluminum
TYPICAL TYPE - Countersunk
APPLICATION - Blind Rivet (Also known as Pop®Rivet)
HOLE SIZE - 0.192 - 0.196
DRILL # - #11 (Not included)
GRIP RANGE - .126 - .250MADE IN USA
MADE IN USA
-
Choose the product options first
California Warning: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.
DIAMETER - 3/16"
TOP LENGTH - 1/2"
LOWER LENGTH - 1-1/8"
MATERIAL CONTENT - All Aluminum
TYPICAL TYPE - Large Flange
APPLICATION - Blind Rivet (Also known as Pop®Rivet)
HOLE SIZE - 0.192 - 0.196
DRILL # - #11 (Not included)
GRIP RANGE - .251 - .375MADE IN USA
-
Choose the product options first
California Warning: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.
DIAMETER - 3/16"
TOP LENGTH - 1/2"
LOWER LENGTH - 1-1/8"
MATERIAL CONTENT - All Aluminum
TYPICAL TYPE - Regular
APPLICATION - Blind Rivet (Also known as Pop®Rivet)
HOLE SIZE - 0.192 - 0.196
DRILL # - #11 (Not included)
GRIP RANGE - .251 - .375MADE IN USA
-
Choose the product options first
California Warning: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.
DIAMETER - 3/16"
TOP LENGTH - 1/2"
LOWER LENGTH - 1-1/2"
MATERIAL CONTENT - All Aluminum
TYPICAL TYPE - Countersunk
APPLICATION - Blind Rivet (Also known as Pop®Rivet)
HOLE SIZE - 0.192 - 0.196
DRILL # - #11 (Not included)
GRIP RANGE - .251 - .375MADE IN USA
-
Choose the product options first
MADE IN THE USA -
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connections
Use for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing.Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE U.S.A.
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
U.S.C.G. regulates that you must have exhaust on air boats.
So Make it Stainless and Make it Last.2.50" Inch I.D. X 25' Foot Length Coil
HEAVY DUTY STAINLESS STEEL (.018 - .020)NON-MAGNETIC
100% MADE IN THE USA
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! Size: 2-3/4"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connections
Use for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing. Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! Size: 3.50"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connectionsUse for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing.Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
U.S.C.G. regulates that you must have exhaust on air boats.
So Make it Stainless and Make it Last.3.50" Inch I.D. X 25' Foot Length Coil
HEAVY DUTY STAINLESS STEEL (.018 - .020)NON-MAGNETIC
100% MADE IN THE USA
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! Size: 3"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
MADE IN THE USA
-
-
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connectionsUse for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing.Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
U.S.C.G. regulates that you must have exhaust on air boats.
So Make it Stainless and Make it Last.4.00" Inch I.D. X 25' Foot Length Coil
HEAVY DUTY STAINLESS STEEL (.018 - .020)
NON-MAGNETIC100% MADE IN THE USA
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! SIZE: 4"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
Manufacturer’s Rubber & Supply
HEAVY DUTY DURABLE RUBBER
• COLOR: Black
• SHAPE:Rectangular Block
• Made with high tensile, abrasion-resistant rubber compounds
• With 2 Mounting Holes (Mounting Hardware Not Included) 2-3/4" center to center of holes
• Hardness: 30 to 90 Durometer Shore A.
• Material Temperature Range: -60°F to 180°F.APPLICATIONS:
Rubber bumpers are used to protect doors, walls, rails, docks, truck bumpers, utility trailers, carts, fork lifts, curbs, rollers, sliders, packers, pushers, conveyors, braces, corners and other places where metal to surface contact is harsh and continuous.MADE IN THE USA
-
Choose the product options first
We put together the most popular identification labels used on air boat gauge/Instrument panels.
• Made of Thick Plastic, They Will Never Corrode or Rust
• Fastens With Screws or Glue (Not Included)
• Black on White
• Letters Indented
• Size: 1-3/8" Wide x 1/2" Tall
• Kit Includes: 4 STANDARD LABELS (ON - OFF - BILGE PUMP - TRIM)
4 LIGHT LABELS (SPREADER - FLOOD - RUNNING - COURTESY)MADE IN THE USA
-
Choose the product options first
AIR BOAT DEPOT & Star brite, INC.
PROUDLY OFFER 100% MADE IN THE USA
Heavy Duty Transom Tie Down Strap• Color: Black
• 2" Wide Poly Webbing Strap
• Adjustable Length up to 6 Feet
• 2 Heavy Duty Coated S-Hooks
• Beautiful Quick Release Buckle
• Velcro Embroided Buckle Strap
• 1200 Lb Rated Capacity
• 400 Lb Safe Working LoadWarning
• Do not expose the strap to sharp edges, winch gears or extreme heat
• Inspect strap and anchor points periodically
• Keep strap flat. Avoid twisting
• Do not use this strap for lifting humans or towing. It is only to be used to secure loads100% MADE IN THE USA of USA and Imported Parts, FT. LAUDERDALE, FLORIDA
-
Choose the product options first
#A040150-18
• Sold 1 Per Package
• Finish: Natural
• Material: Aluminum
• Corrosion Resistance / Rustproof
• Piano Hinge
• Predrilled Holes
• 18" Length
• 1-1/2" Open WidthCalifornia Warning: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
MADE IN THE USA
-
Choose the product options first
#A040200-18
• Sold 1 Per Package
• Finish: Natural
• Material: Aluminum
• Corrosion Resistance / Rustproof
• Piano Hinge
• Predrilled Holes
• 18" Length
• 2" Open WidthCalifornia Warning: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
MADE IN THE USA
-
Choose the product options first
BUDDY BEARING® BRA #19B Used in the manufacturing of all Swait Airboat Trailers.
• Set of 2 per carded package
• Packaging: Carded
• Fits Buddy Bearing Models; 1980, 1938, 1968, 2080, 2047 and the same in SS
• Bra is easily removed for checking hub lubrication level
• Vinyl Cover fits over the bearing buddy to contain excess grease
• Many users tend to overfill, and, during travel the excess grease can be thrown onto tires and wheels
• If excess grease accumulates inside the bra, periodically clean it out
• Size: 3.8" x 8.7" x 1.6"
• Outer Diameter: 2-1/8"
• Weight: 8 oz.
MADE IN THE USA