INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching Hardware
HEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPE
INSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connections
Use for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing. Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.
FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.
MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
