Search

DISCONTINUED ITEM

BOSS® GLOSS BOOTS MODEL# 2KP2001

Please Use The Dropdown List Below To select Your Size

Boots do not come in half sizes. They may take up to a week for processing which depends on the level of our stock at the time of your order. SORRY, CANNOT BE SOLD IN CALIFORNIA DUE TO PROPOSITION 65.

• Availabe Shoe Sizes: Men's 6, 7, 8, 9, 10, 11, 12, 13 & 14

• Category: Industrial Boots

• Style Type: 16" Over The Sock Knee-High

• Color: Gloss Black

• Material Content: PVC (Polyvinyl Chloride) Outer Boot

• Packaged: (1 Pair)

• Plain Toe

• Safety Lock Outer Sole

• Easily Wiped Down Exterior

• Cushioned Insole

• Molded Shank

• Protection: Waterproof & Where Mild Chemical Resistance is Needed.

• Resistant to Oils, Certain Acids, Fats, Hydrocarbons, Caustics, and Other Chemicals.

• Cleated Outsole To Spit Out Mud, Snow and Debris. Great for Construction, Farming or Gardening. Will Give You Superior Traction on Wet or Slippery Surfaces

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the boots or its components. These boots are recommended for general work use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No waterproof-chemical resistant boot will resist chemicals indefinitely. If the boots show any effects from contact with chemicals or holes appear, No longer use the boots for further chemical protection.

MADE IN CHINA 

BOSS® EST. 1893

Great For Giving/Selling To Guest or Tour Ride Customers On Rainy Emergencies

SIZE: One Size Fits All

COLOR: Green

MATERIAL CONTENT: 100% PVC

• Full Cut 52" x 80"

• Side Snap Closure

• Attached Hood

• Water Repellent

• Individual Packaged in Reusable Snap Case with Peg Hole

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA

BOSS® EST. 1893

Great For Giving/Selling To Guest or Tour Ride Customers On Rainy Emergencies

SIZE: One Size Fits All

COLOR: Orange

MATERIAL CONTENT: 100% PVC

• Full Cut 52" x 80"

• Side Snap Closure

• Attached Hood

• Water Repellent

• Individual Packaged in Reusable Snap Case with Peg Hole

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA

BOSS® EST. 1893

Great For Giving/Selling To Guest or Tour Ride Customers On Rainy Emergencies

SIZE: One Size Fits All

COLOR: Blue

MATERIAL CONTENT: 100% PVC

• Full Cut 52" x 80"

• Side Snap Closure

• Attached Hood

• Water Repellent

• Individual Packaged in Reusable Snap Case with Peg Hole

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA 

BOSS® EST. 1893 MODEL# 3PR0290Y 
Please Use The Dropdown To Select Your Size

SORRY, CANNOT BE SOLD IN CALIFORNIA DUE TO PROPOSITION 65. 

Available Sizes: Small, Medium, Large & Extra Large

COLOR: Yellow

MATERIAL CONTENT: 60% PVC, 40% Polyester

• 100% Water-proof Protection Against Snow-Rain-Sleet and most chemicals

• Tough, Long Wearing PVC Garment Construction

• Jacket has Detachable Hood, Storm Fly Front, Raglan Sleeves with Take-Up Snaps at Cuff and Two Patch Pockets with Snaps

• Bib Overall Pants with Snap-Fly Front, Take-Up Snaps at Ankle, Non-Corrosive/Non-Conductive Plastic Snaps and Adjustable Elastic Suspenders with Plastic Buckle

• All Seams Electronically Welded

• Soft-Pliable at Low Temperatures

• Full Cut Allows Action Freedom

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA

ITEM IS DISCONTINUED CHECK LAST AVAILABLE SIZE AND STOCK

BOSS® STEEL TOE - HIP WADERS MODEL# 2HS6231

Please Use The Dropdown List Below To select Your Size

Boots do not come in half sizes. They may take up to a week for processing which depends on the level of our stock at the time of your order. SORRY, CANNOT BE SOLD IN CALIFORNIA DUE TO PROPOSITION 65.

• Available Shoe Sizes: Men's 5, 6, 7, 8, 9, 10, 11, 12 & 13

• Model Name: Steel Toe - Hip Waders

• Style/Category: Heavy Duty Industrial Boots

• Style Type: 34" Over The Sock Hip-High

• Approximate Measurements: 34" Outer Leg Side Length From Sole to Leg Top (Contours Down To 29-1/2" High on Inner-Thigh Side length)

• Color: Black

• Material Content: Rubber

• Packaged: (1 Pair)

• Cushioned Insole

• Steel Toe & Shank

• Reinforced Knee & Toe Cap

• Bar-Tread Non-Slip Sole

• Easily Wiped Down Exterior

• Fabric Lined

• Adjustable Buckle Closure & Belt Loop Strap

• Protection: Waterproof & Where Chemical Resistance is Needed.

• ASTMF 2418-05 M/1/75, C75, ANSI Z41.1-1983 CLASS 75 APPROVED

• Average Weight: 1 Pair: 8.5 lbs

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the boots or its components. These boots are recommended for general work use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No waterproof-chemical resistant boot will resist chemicals indefinitely. If the boots show any effects from contact with chemicals or holes appear, No longer use the boots for further chemical protection.

MADE IN CHINA

BOSS® EST. 1893 MODEL# 3PR0300C 3 PIECE RAIN SUIT

SORRY, CANNOT BE SOLD IN CALIFORNIA DUE TO PROPOSITION 65.

Please Use The Dropdown To Select Your Size
AVAILABLE SIZES: Medium, Large, X-Large, 2 X-Large & 3 X-Large

COLOR: Camouflage

MATERIAL CONTENT: 60% PVC, 40% Polyester

• Individual Packaged in Reusable Snap Case with 3-Peg Holes

• 100% Water-proof Protection Against Snow-Rain-Sleet and most chemicals

• Tough, Long Wearing PVC Garment Construction

• Jacket has Detachable Hood with Drawstring

• Storm Fly Front, Raglan Sleeves with Take-Up Snaps at Cuff and Two Pockets with Snaps

• Vented Cape Back

• Bib Overall Pants with Snap-Fly Front

• Take-Up Snaps at Ankle, Non-Corrosive/Non-Conductive Plastic Snaps

• Adjustable Plastic Buckles and Strap with Elastic Insert

• All Seams Electronically Welded

• Soft-Pliable at Low Temperatures

• Full Cut Allows Action Freedom

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA

BOSS® WORK HARD. WEAR BOSS, EST. 1893

• Size: Large 9

• Color: Black

• Category: Assembly Gloves

• Style: Garden, Multi Purpose

• Material Content: 55% Nitrile Palm / 45% Polyester String Knit Shell

• Packaged: (5 Pair in Each Pack)

• Re-Usable - Machine Washable, Do not machine heat dry!

• Nitrile Dipped Palm & Fingertips

• Stretchable Nylon Shell

• Knit wrist

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

CALIFORNIA WARNING; This product may contain chemicals known in the State of California to cause cancer, birth defects, and other reproductive harm.

MADE IN CHINA - ENGINEERED IN THE USA

BOSS® EST. 1893 MODEL# 3PF2000Y 3 PIECE RAINSUIT

SORRY, CANNOT BE SOLD IN CALIFORNIA DUE TO PROPOSITION 65.

Please Use The Dropdown To Select Your Size
AVAILABLE SIZES: Small, Medium, Large, X-Large & 2 X-Large

COLOR: Yellow

MATERIAL CONTENT: 60% PVC, 40% Polyester

• Individual Packaged in Reusable Snap Case with 3-Peg Holes

• Vented Cape Back

• 100% Water-proof Protection Against Snow-Rain-Sleet and most chemicals

• Tough, Long Wearing PVC Garment Construction

• Jacket has Detachable Drawstring Hood, Storm Fly Front, Raglan Sleeves with Take-Up Snaps at Cuff and Two Patch Pockets.

• Bib Overall Pants with Snap-Fly Front Take-Up Snaps at Ankle and Adjustable Elastic Suspenders with Plastic Buckles

• Non-Corrosive/Non-Conductive Plastic Snaps

• All Seams Electronically Welded

• Soft-Pliable at Low Temperatures

• Full Cut Allows Action Freedom

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA

BOSS® EST. 1893 WORK HARD. WEAR BOSS.

Because Boss’ assembly gloves offer breathability and dexterity, they’re ideal for assembly applications and small parts handling. Try a nitrile style to repel oil and other solvents, or a polyurethane palm when saturation isn’t a concern.

• AVAILABLE SIZES: Kids Age 9-12

• Style/Category: Industrial Assembly Gloves Hi-Vis

• Color: Hi-Visibility Yellow

• Model: Big Helper

• 13 Gauge

• Material Content: 54% Polyester Shell, 46% Latex Palm

• Packaged: (1 Pair)

• Semi-Re-Usable -Machine Washable, Do not Heat Dry

• Breathable Back

• Good Abrasion & Light Oil Resistance

• Knit Wrist (Keeps dirt and debris out while providing a secure fit. Helps keep hands warm by preventing air from getting inside or escaping. Fits under clothing sleeves.)

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

MADE IN CHINA - ENGINEERED IN THE USA

CALIFORNIA WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.

BOSS® EST. 1893 MODEL# 3PF2689Y

SORRY, CANNOT BE SOLD IN CALIFORNIA DUE TO PROPOSITION 65.

Please Use The Dropdown To Select Your Size
AVAILABLE SIZES: Small, Medium, Large, Extra Large & 2 Extra Large

COLOR: Yellow

MATERIAL CONTENT: 60% PVC, 40% Polyester

• Individual Packaged in Reusable Snap Case with Peg Hole

• 100% Water-proof Protection Against Snow-Rain-Sleet and most chemicals

• Tough, Long Wearing PVC Garment Construction

• Jacket has Detachable Drawstring Hood, Take-Up Snaps at Cuff and Two Patch Pockets.

• Elastic Waist Pants with Take-Up Snaps at Ankles

• Non-Corrosive/Non-Conductive Plastic Snaps

• All Seams Electronically Welded

• Soft-Pliable at Low Temperatures

• Full Cut Allows Action Freedom

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

MADE IN CHINA

BOSS® WORK HARD. WEAR BOSS, EST. 1893

Great for keeping hands dry and offers protection from scrapes and abrasions

• Size: Ladies One Size Fits All or Most

• Color; Purple/Black

• Category: Assembly Gloves

• Style: Dig In™ Guardian Angel™

• Material Content: 52% Latex Palm / 17% Spandex /. 31% Polyester Shell

• Packaged: (1 Pair)

• Re-Usable - Machine Washable, Do Not Heat Dry

• Foam Palm & Fingertips

• Knit Wrist (helps keep dirt and debris out and easily fits under clothing)

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

CALIFORNIA WARNING: This product may contain materials known to the State of California to cause cancer, birth defects, and other reproduction harm.

MADE IN CHINA - ENGINEERED IN THE USA 

BOSS® WORK HARD - WEAR BOSS™

Not Just great for mechanics, but also air boat tour guide operators to offer a low price in eye protection to their customers. Reduce the air flow to their eyes and help reduce watery eyes, makeup running, contact lens issues or airborn pollens and flying particles.

• Lens Type: Polycarbonate Anti-Fog and Protect From Impact

• Polycarbonate Scratch Resistant

• UVA and UVB Protection: 99.9%

• Lens Color: Yellow

• Temple Ear Stem Color: Black

• Non-Slip Rubber Head Grips

• Molded Side Shields

• Lightweight Design With Adjustable and Extendable Temples

• Meets ANSI Z87.1-2010 Standards

WARNING: This eyewear protection meets the requirements of certain industrial eyewear standards and provides limited eyewear protection. The lenses are impact resistant but not unbreakable. They do not protect against severe impact and penetration and are not a substitute for good safety practices and engineering controls. Misuse may result in serious injury including blindness or death. For proper use always see your supervisor.

USER INSTRUCTIONS: This eyewear meets the requirements of ANSI Z87.1 and may meet the requirements of certain other industrial eyewear standards. Occupational use of these products must be in compliance with applicable health and safety standards. Use this eyewear to help protect from flying objects or particles. Some operators may require special filter or tinted lenses, machine guards, goggles, face shields or other safety equipment. Special filter or tinted lenses may alter color perception - care should be taken in their selection and use, especially where color recognition is important, i.e., traffic signals, wire splicing, visual displays, etc. These polycarbonate lenses provide 99.9% UVA and UVB protection. Always use both hands to put on and remove eyewear. Before use, fit eyewear in a secure and comfortable position. Improperly fitted eyewear may not provide adequate protection. Inspect the eyewear frequently and replace it immediately if you notice cracking, crazing, pitting, scratching, deformation or other signs of damage.

DO NOT USE THIS EYEWEAR ALONE for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric arc welding, furnace or molten metal operations or glass blowing. Do not use this eyewear for chemical splash or vapor protection, laser light, athletic sports, paintball or simulated combat games. Do not use this eyewear for protection against sever impacts such as explosions, fragmenting grinding, or abrasive wheel donning and fitting.

CLEAN LENSES with water and mild soap solution and dry with a soft cloth. Cleaning eyewear with solvents or other chemicals such as MEK, acetone or toluene may damage the frames, lenses and/or coatings and reduce their protective characteristics

STORE eyewear in a clean area protected from contamination, damage, particulates, debris, direct sunlight, chemicals, high heat or extreme cold.

MADE IN CHINA

Some gloves may have a slight white stain on them due to moisture on tags during shipment or wharehouse storage, price is reduced as a result, see second photo)

BOSS® Dig-In™ EST. 1893

These gloves will fit you like a second skin and will protect you from dirt, cuts, abrasions, burns etc.

Textured Latex For Grip and Wear with a Stretchable Polyester Shell For Flexibility..

• AVAILABLE SIZES: Medium 8, Large 9 & Extra Large 10 (Use Drop Down Selection Box Below)

• Style/Category: Assembly / Gardener

• Color: Red/Black

• Material Content: 65% Latex Palm & Fingertips - 35% Polyester Shell

• Packaged: (1 Pair)

• Re-Usable - Machine Washable, Do not heat dry

• Cuff Type: Knit Wrist (Seals out Dirt and Debris)

• Color Coded Hem lines

• Palm Style: Textured Foam Latex Dipped Palm and Fingertips

• Flexible Breathable Back

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

MADE IN CHINA - ENGINEERED IN THE USA

CALIFORNIA WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.

BOSS® WORK HARD - WEAR BOSS™

Not Just great for mechanics, but also air boat tour guide operators to offer a low price in eye protection to their customers. Reduce the air flow to their eyes and help reduce watery eyes, makeup running, contact lens issues or airborn pollens and flying particles.

• Lens Type: Polycarbonate Anti-Fog and Protect From Impact

• Polycarbonate Scratch Resistant

• UVA and UVB Protection: 99.9%

• Lens Color: Clear

• Frame Color: Clear

• Wrap Around Style

• Lightweight Design

• Meets ANSI Z87.1-2010 Standards

WARNING: This eyewear protection meets the requirements of certain industrial eyewear standards and provides limited eyewear protection. The lenses are impact resistant but not unbreakable. They do not protect against severe impact and penetration and are not a substitute for good safety practices and engineering controls. Misuse may result in serious injury including blindness or death. For proper use always see your supervisor.

USER INSTRUCTIONS: This eyewear meets the requirements of ANSI Z87.1 and may meet the requirements of certain other industrial eyewear standards. Occupational use of these products must be in compliance with applicable health and safety standards. Use this eyewear to help protect from flying objects or particles. Some operators may require special filter or tinted lenses, machine guards, goggles, face shields or other safety equipment. Special filter or tinted lenses may alter color perception - care should be taken in their selection and use, especially where color recognition is important, i.e., traffic signals, wire splicing, visual displays, etc. These polycarbonate lenses provide 99.9% UVA and UVB protection. Always use both hands to put on and remove eyewear. Before use, fit eyewear in a secure and comfortable position. Improperly fitted eyewear may not provide adequate protection. Inspect the eyewear frequently and replace it immediately if you notice cracking, crazing, pitting, scratching, deformation or other signs of damage.

DO NOT USE THIS EYEWEAR ALONE for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric arc welding, furnace or molten metal operations or glass blowing. Do not use this eyewear for chemical splash or vapor protection, laser light, athletic sports, paintball or simulated combat games. Do not use this eyewear for protection against sever impacts such as explosions, fragmenting grinding, or abrasive wheel donning and fitting.

CLEAN LENSES with water and mild soap solution and dry with a soft cloth. Cleaning eyewear with solvents or other chemicals such as MEK, acetone or toluene may damage the frames, lenses and/or coatings and reduce their protective characteristics

STORE eyewear in a clean area protected from contamination, damage, particulates, debris, direct sunlight, chemicals, high heat or extreme cold.

MADE IN CHINA

BOSS® TRAIL WISE® WORK HARD, WEAR BOSS® EST. 1893

Great for IT Techs and others who must perform using the feel of their fingers, while keeping palms and remainder of hand warm.

• SIZE: Large 9

• Hand Circumference Size: 9" - 10"

• Category: Warming Gloves

• Style: Half Finger

• Color: Beige

• Material Content: 85% Rag Wool / 15% Nylon

• Ribbed Knit (Flexible for easy movement)

• Packaged: (1 Pair)

• Re-Usable

• Knit Wrist (keeps dirt and debris out and fits under clothing sleeves)

• Straight Thumb Design (Thumb is partially cut as one piece with the palm, and extends straight from the wrist. Ideal for closed fist applications.)

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

CALIFORNIA WARNING; This product may contain chemicals known in the State of California to cause cancer, birth defects, and other reproductive harm.

MADE IN CHINA - ENGINEERED IN THE USA

BOSS® WORK HARD - WEAR BOSS™

Not Just great for mechanics, but also air boat tour guide operators to offer a low price in eye protection to their customers. Reduce the air flow to their eyes and help reduce watery eyes, makeup running, contact lens issues or airborn pollens and flying particles.

• Lens Type: Polycarbonate Anti-Fog and Protect From Impact

• Polycarbonate Scratch Resistant

• UVA and UVB Protection: 99.9%

• Lens Color: Blue Mirror

• Frame Color: Black

• Temple Ear Piece Color: Orange

• Wrap Around Style

• Molded Sided Shields

• Lightweight Design

• Meets ANSI Z87.1-2010 Standards

WARNING: This eyewear protection meets the requirements of certain industrial eyewear standards and provides limited eyewear protection. The lenses are impact resistant but not unbreakable. They do not protect against severe impact and penetration and are not a substitute for good safety practices and engineering controls. Misuse may result in serious injury including blindness or death. For proper use always see your supervisor.

USER INSTRUCTIONS: This eyewear meets the requirements of ANSI Z87.1 and may meet the requirements of certain other industrial eyewear standards. Occupational use of these products must be in compliance with applicable health and safety standards. Use this eyewear to help protect from flying objects or particles. Some operators may require special filter or tinted lenses, machine guards, goggles, face shields or other safety equipment. Special filter or tinted lenses may alter color perception - care should be taken in their selection and use, especially where color recognition is important, i.e., traffic signals, wire splicing, visual displays, etc. These polycarbonate lenses provide 99.9% UVA and UVB protection. Always use both hands to put on and remove eyewear. Before use, fit eyewear in a secure and comfortable position. Improperly fitted eyewear may not provide adequate protection. Inspect the eyewear frequently and replace it imediately if you notice cracking, crazing, pitting, scratching, deformation or other signs of damage.

DO NOT USE THIS EYEWEAR ALONE for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric arc welding, furnace or molten metal operations or glass blowing. Do not use this eyewear for chemical splash or vapor protection, laser light, athletic sports, paintball or simulated combat games. Do not use this eyewear for protection against sever impacts such as explosions, fragmenting grinding, or abrasive wheel donning and fitting.

CLEAN LENSES with water and mild soap solution and dry with a soft cloth. Cleaning eyewear with solvents or other chemicals such as MEK, acetone or toluene may damage the frames, lenses and/or coatings and reduce their protective characteristics

STORE eyewear in a clean area protected from contamination, damage, particulates, debris, direct sunlight, chemicals, high heat or extreme cold.

MADE IN CHINA

G-Tek®PolyKor®

Industry Grade Seamless Knit PolyKor® Blended Glove w/ PolyurethaneCoated Flat Grip on Palm & Fingers

• AVAILABLE SIZES: Small 7, Medium 8, Large 9, X-Large 10 & 2X-Large 11

• Style/Category:PolyKor® Cut Resistant

• Color: Gray

• Material Content: Liner; PolyKor   Palm & Fingers: Polyurethane 

• Gauge: 13

• Color Coded Hem

• Breathable Back

• ASTM F2992-15 ANSI Cut Level A4 (Adopted by ANSI/ISEA 02/16)

• EN 388:4542 Cut Level 5

• Grip: Flat

• Cuff Style: Knit Wrist

• Seamless construction offers increased comfort and breathability

• PolyKor® shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance

• Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip

• Knit wrist helps prevent dirt and debris from entering the glove

• Cotton color binding denotes sizing

• Washable, resistant to chemicals, water, and ultraviolet light

• Knit Wrist (Keeps dirt and debris out while providing a secure fit. Helps keep hands warm by preventing air from getting inside or escaping. Fits under clothing sleeves.)

• G-Tek Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

APPLICATIONS

• Electronics

• Glass cutting

• Sheet metal handling

• General duty

• Parts assembly

• Sharp small parts handling

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

MADE IN CHINA

CALIFORNIA WARNING PROP 65: This item may contain materials known to the state of California to cause cancer, birth defects and other reproductive harm.

CARE INSTRUCTIONS Recommend washing gloves in slightly warm water not exceeding 40ºC. A mild non-ionic detergent should be used. A 5-10 minute cycle time should be employed. Tumble dry on low - maximum temperature 140ºF (60ºC)

THE MAX® NAT & TRIPLE CROWN

• High Quality Sewed

• Color: Red

• Logo Color Stitching: Red on Yellow Background with Black Outline

• 100% Cotton

• 6 Breathing Holes On top

• Hard Brim

• Adjustable Velcro Back Strap

MADE IN CHINA

BOSS BLADE DEFENDER EXTREMEKor®

Industry Grade 

• AVAILABLE SIZES: Medium 8, 2X Large

• Style/Category: Cut Resistant

• Color: Gray

• Material Content: HPPE (Olefin)/ Poly/ PU Coated Palm/ Glass Fiber/Spandex Shell

• Gauge: 

• Color Coded Hem

• Breathable Back

• ANSI Cut Level A4, EN 388 Cut Level 3

• Cuff Style: Knit Wrist

• Polyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry grip

• Knit wrist helps prevent dirt and debris from entering the glove

• Cotton color binding denotes sizing

• Washable, resistant to chemicals, water, and ultraviolet light

• Knit Wrist (Keeps dirt and debris out while providing a secure fit. Helps keep hands warm by preventing air from getting inside or escaping. Fits under clothing sleeves.)

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

APPLICATIONS

• Electronics

• Glass cutting

• Sheet metal handling

• General duty

• Parts assembly

• Sharp small parts handling

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

MADE IN CHINA

CALIFORNIA WARNING PROP 65: This item may contain materials known to the state of California to cause cancer, birth defects and other reproductive harm.

CARE INSTRUCTIONS Recommend washing gloves in slightly warm water not exceeding 40ºC. A mild non-ionic detergent should be used. A 5-10 minute cycle time should be employed. Tumble dry on low - maximum temperature 140ºF (60ºC)

BOSS® WORK HARD. WEAR BOSS, EST. 1893

HOTWING™ 100% Cotton Boss Cord™

WE WON'T SELL GLOVES WE DON'T WEAR OURSELVES!
Many styles & brands look alike in gloves, they vary greatly and come in many different type materials, cuffs, cuts and seams. They are not the same and should be compared properly. We tried over 6 brands and then those brands different styles to find the ones we felt to be the best fitting, most comfortable and able to hold up to the application use wear.

• SIZE: Large 9

• Hand Circumference Size: 9" - 10"

• Category: Hot Mill Gloves

• Style: HOTWING™ 

• Color: Natural (Light Beige)

• Material Content: 100% Cotton Boss Cord™

• Gauge: 12 oz - 3 Ply Palm

• Packaged: (1 Pair)

• Re-Usable

• Thumb: Wing

• Cuff: Band Top

• Felt Lining: 14 oz

• 10 oz Back of Hand

• Clute Cut Design

• Wing Thumb (Material is cut from the same piece as the palm following the natural shape of the hand with the thumb extending to the side.)

• Clute Cut Design (Seamless Palm constructed from a continuous piece of material. The finger seams are located toward the palm side of the glove, with the back seams running parallel from finger-crotch  to wrist.)

• Band Top; (Provides light duty wrist protection and allows air to circulate around the hand. Easy on/off.)

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

MADE IN PAKISTAN - ENGINEERED IN THE USA

BOSS® WORK HARD. WEAR BOSS, EST. 1893

WE WON'T SELL GLOVES WE DON'T WEAR OURSELVES!
Many styles & brands look alike in gloves, they vary greatly and come in many different type materials, cuffs, cuts and seams. They are not the same and should be compared properly. We tried over 6 brands and then those brands different styles to find the ones we felt to be the best fitting, most comfortable and able to hold up to the application use wear.

• SIZE: Large 9

• Hand Circumference Size: 9" - 10"

• Category: Hot Mill Gloves

• Style: HOTMILL NAP OUT GREEN 

• Color: Green & Natrual (Light Beige)

• Material Content: 100% Cotton -  Green Quilted 100% Cotton Flannel

• Gauge: 13 oz - 3 Ply

• Packaged: (1 Pair)

• Re-Usable

• Thumb: Straight

• Cuff: Band Top

• Nap Out Palm

• Lining: 8 Oz. Burlap & 8 Oz. Non-Woven Linings

• 10 oz Back of Hand

• Clute Cut Design

• Straight Thumb (Thumb is partially cut as one piece with the palm, and extends straight from the wrist. Ideal for closed fist applications.)

• Clute Cut Design (Seamless Palm constructed from a continuous piece of material. The finger seams are located toward the palm side of the glove, with the back seams running parallel from finger-crotch  to wrist.)

• Band Top; (Provides light duty wrist protection and allows air to circulate around the hand. Easy on/off.)

• Boss Manufacturing Company will not be liable to individuals who experience allergic reactions to the materials used in the gloves or its components. These gloves are recommended for general use.

• Manufactured Under the Most Rigid Quality Control Standards in the Industry!

CAUTION! The description of this product is to indicate its general usability only. The purchaser should use caution and verify the suitability of this product for a specific job. No glove will resist chemicals indefinitely. If the gloves show any effect from contact with chemicals or holes appear, dispose of the gloves immediately.

MADE IN PAKISTAN - ENGINEERED IN THE USA

3M® Great idea for tour guide operators to offer a low price eye protection to their customers. Reduce the air flow to their eyes and help reduce watery eyes, or makeup running, contact lens issues or airborn pollens and flying particles.

• Lens Type: Polycarbonate Anti-Fog

• UVA and UVB Protection: 99.9%

• Lens Color: Clear

• Frame Color: Clear (Ear stems are Frosted)

• Meets ANSI Z87.1-2010 Standards

WARNING: This eyewear protection meets the requirements of certain industrial eyewear standards and provides limited eyewear protection. The lenses are impact resistant but not unbreakable. They do not protect against severe impact and penatration and are not a substitute for good safety practices and engineering controls. Misuse may result in serious injury including blindness or death. For proper use always see your supervisor.

USER INSTRUCTIONS: This eyewear meets the requirements of ANSI Z87.1 and may meet the requirements of certain other industrial eyewear standards. Occupational use of these products must be in compliance with applicable health and safety standards. Use this eyewear to help protect from flying objects or particles. Some operators may require special filter or tinted lenses, machine guards, goggles, face shields or other safety equipment. Special filter or tinted lenses may alter color perception - care should be taken in their selection and use, especially where color recognition is important, i.e., traffic signals, wire splicing, visual displays, etc. These polycarbonate lenses provide 99.9% UVA and UVB protection. Always use both hands to put on and remove eyewear. Before use, fit eyewear in a secure and comfortable position. Improperly fitted eyewear may not provide adequate protection. Inspect the eyewear frequently and replace it immediatly if you notice cracking, crazing, pitting, scratching, deformation or other signs of damage.

DO NOT USE THIS EYEWEAR ALONE for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric arc welding, furnace or molten metal operations or glass blowing. Do not use this eyewear for chemical splash or vapor protection, laser light, athletic sports, paintball or simulated combat games. Do not use this eyewear for protection against sever impacts such as explosions, fragmenting grinding, or abrasive wheel donning and fitting.

CLEAN LENSES with water and mild soap solution and dry with a soft cloth. Cleaning eyewear with solvents or other chemicals such as MEK, acetone or toluene may damage the frames, lenses and/or coatings and reduce their protective characteristics

STORE eyewear in a clean area protected from contamination, damage, particulates, debris, direct sunlight, chemicals, high heat or extreme cold.

MADE IN CHINA 

3M® Great idea for tour guide operators to offer a low price eye protection to their customers. Reduce the air flow to their eyes and help reduce watery eyes, or makeup running, contact lens issues or airborn pollens and flying particles.

• Lens Type: Polycarbonate Anti-Fog

• UVA and UVB Protection: 99.9%

• Lens Color: Smoked Gray

• Frame Color: Smoked Gray (Ear stems are black)

• Meets ANSI Z87.1-2010 Standards

WARNING: This eyewear protection meets the requirements of certain industrial eyewear standards and provides limited eyewear protection. The lenses are impact resistant but not unbreakable. They do not protect against severe impact and penetration and are not a substitute for good safety practices and engineering controls. Misuse may result in serious injury including blindness or death. For proper use always see your supervisor.

USER INSTRUCTIONS: This eyewear meets the requirements of ANSI Z87.1 and may meet the requirements of certain other industrial eyewear standards. Occupational use of these products must be in compliance with applicable health and safety standards. Use this eyewear to help protect from flying objects or particles. Some operators may require special filter or tinted lenses, machine guards, goggles, face shields or other safety equipment. Special filter or tinted lenses may alter color perception - care should be taken in their selection and use, especially where color recognition is important, i.e., traffic signals, wire splicing, visual displays, etc. These polycarbonate lenses provide 99.9% UVA and UVB protection. Always use both hands to put on and remove eyewear. Before use, fit eyewear in a secure and comfortable position. Improperly fitted eyewear may not provide adequate protection. Inspect the eyewear frequently and replace it immediatly if you notice cracking, crazing, pitting, scratching, deformation or other signs of damage.

DO NOT USE THIS EYEWEAR ALONE for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric arc welding, furnace or molten metal operations or glass blowing. Do not use this eyewear for chemical splash or vapor protection, laser light, athletic sports, paintball or simulated combat games. Do not use this eyewear for protection against sever impacts such as explosions, fragmenting grinding, or abrasive wheel donning and fitting.

CLEAN LENSES with water and mild soap solution and dry with a soft cloth. Cleaning eyewear with solvents or other chemicals such as MEK, acetone or toluene may damage the frames, lenses and/or coatings and reduce their protective characteristics

STORE eyewear in a clean area protected from contamination, damage, particulates, debris, direct sunlight, chemicals, high heat or extreme cold.

MADE IN CHINA