Previous image Next image
Zoom image

KIDDE® MARINER 5 Disposable Fire Extinguisher, White, U.S.C.G. Approved with Molded Strap Bracket (Included)

KIDDE MARINER 5, WHITE, (BC) SIZE 1, DRY CHEMICAL POWDER
U.S.C.G. APPROVED W/ MOLDED STRAP BRACKET (INCLUDED)
SERVICE/INSPECTION RECORD TAG (INCLUDED)
♦ DISPOSABLE W/PIN, REPLACE AFTER 12 YRS FROM MFG DATE
♦ UL RATED 5-B;C (FOR FIRE TYPES B & C)
♦ EASY TO MOUNT, USE, AND READ PRESSURE GAUGE
♦ GAUGE ALLOWS FOR IMMEDIATE PRESSURE STATUS CHECK
♦ DISCHARGE TIME: APPROXIMATELY 8-12 SECONDS
♦ ALUMINUM CYLINDER & TOUGH NYLON VALVE ASSEMBLY
♦ UL 1-A:5BC, 2 LB, UL299, UL271
♦ 6 YR LIMITED WARRANTY

U.S.C.G. REQUIREMENTS
The Minimum number of Mariner 5 extinguishers needed to comply is as follows:
# REQUIRED   VESSEL LENGTH      
(1)                    UP TO 26 FEET         
(2)                    26 TO 40 FEET    
(3)                    40 TO 65 FEET    

UL Rated 5-B;C (For Fire Types B & C) RATED FOR;
B - FLAMMABLE LIQUIDS, GASOLINE, HEPTANE, ETC.
C - ELECTRICAL EQUIPMENT, SWITCHES, OUTLETS, ETC.
BC RATED EXTINGUISHERS ARE ALSO RECOMMENDED FOR COOKING AREAS

"PASS" (P)ULL (A)IM (S)QUEEZE (S)WEEP
Pull the Pin to Unlock the Operating Lever
Aim the Fire Extinguisher at the Base of the Fire from 6 Feet (1.8M) Away
Squeeze and Hold the Trigger to Discharge the Powder or Agent
Sweep From Side to Side at the Base of the Fire

ALWAYS KEEP AWAY FROM CHILDREN AND NEVER DISCHARGE AT A PERSON'S FACE

DRY CHEMICAL POWDER: SODIUM BICARBONATE, MICA, CALCIUM STEARATE
NUISANCE DUST, IRRITANT; HMIS 1-0-0 - NON TOXIC CHEMICAL AGENTS BUT MAY CAUSE SKIN IRRITATION
National Fire Protection Association (NFPA) No. 10
Meets D.O.T. Requirements for Aluminum Cylinders - Tested to 300 psi. (20.7 bar)
TYPE B;C SIZE 1 - Tested to ANSI/UL711 and ASNI/UL 299
U.S.C.G. Approval Number 162.028/EX1793 - Valid Only with Bracket Number P/N 896698 (INCLUDED)

BEFORE ORDERING PLEASE NOTE: U.S. Domestic Ground transportation in the 48 Contiguous states only. Limited Haz Mat. ORM-D. Not deliverable to Alaska, Hawaii, Puerto Rico, Avalon, CA; Catalina Island, CA; Beaver Island, MI; Mackinac Island, MI (winter only); The Bass Islands, OH; Kelleys Island, OH; and San Juan Islands, WA.

In stock (2 items available)
  • $20.75
Qty:  
Add a different product to compare
  • Weight
    4.0000 lbs
  • SKU
    AB-466179K

INSPECTION AND MAINTENANCE:
To ensure that your fire extinguisher will be ready when needed, read and follow all instructions on label and owner's manual.
DO NOT TEST by discharging, any use will cause pressure loss.
Inspect the extinguisher AT LEAST once a more or more frequently if exposed to weather or possible tampering. 

Check that extinguisher is charged. Pointer on pressure indicator MUST be in the green section.
If pointer is in the red or white section extinguisher will not work properly and MUST BE DISCARDED.
Be sure the lock pin is firmly in place. Keep the extinguisher clean. Check for dents, scratches, corrosion or any other damage.
DISCARD if dropped, damaged, dented or corroded in any way.
Check the discharge nozzle. Make sure it is clean and free of obstructions.
Extinguisher to be installed, inspected, maintained and tested in accordance with the NFPA.
DISCARD IMMEDIATLY AFTER USE. Completyly discharge unit before disposing.
Do not store at temperatures above 120 degrees F. or below -40 degrees F.

Customer reviews
Average rating:

Score: 5.00. Votes: 1
Rating of votes (1)
5
 
1 customers
4
 
 
0 customers
3
 
 
0 customers
2
 
 
0 customers
1
 
 
0 customers
 
There are no reviews for this product yet