MCR BearKat PART# BK112
Magnifier safety glasses from MCR Safety. Unbelievable fit and comfort will make you forget that they are on! Yet the wide view you get from the glasses hugging your face will lead you to conclude, these are the safest. Not Just great for mechanics, but also air boat tour guide operators to offer a low price in eye protection to their customers. Reduce the air flow to their eyes and help reduce watery eyes, makeup running, contact lens issues or airborn pollens and flying particles.
• Lens Type: Polycarbonate Anti-Fog
• Duramass® Polycarbonate Scratch Resistant
• Single Wrap Around Lens Design
• Flexible Temple
• Non-Slip Rubber Head Grips
• UVA Protection: 99.9%
• Lens Color: Gray
• Frame Color: Gray
• Nosepiece Type: Polycarbonate
• Meets ANSI Z87.1-2010 Standards / AS/NZS 1337.1: / CE EN166: / CAN/CSA Z94.3
WARNING: This eyewear protection meets the requirements of certain industrial eyewear standards and provides limited eyewear protection. The lenses are impact resistant but not unbreakable. They do not protect against severe impact and penetration and are not a substitute for good safety practices and engineering controls. Misuse may result in serious injury including blindness or death. For proper use always see your supervisor.
USER INSTRUCTIONS: This eyewear meets the requirements of ANSI Z87.1 and may meet the requirements of certain other industrial eyewear standards. Occupational use of these products must be in compliance with applicable health and safety standards. Use this eyewear to help protect from flying objects or particles. Some operators may require special filter or tinted lenses, machine guards, goggles, face shields or other safety equipment. Special filter or tinted lenses may alter color perception - care should be taken in their selection and use, especially where color recognition is important, i.e., traffic signals, wire splicing, visual displays, etc. These polycarbonate lenses provide 99.9% UVA protection. Always use both hands to put on and remove eyewear. Before use, fit eyewear in a secure and comfortable position. Improperly fitted eyewear may not provide adequate protection. Inspect the eyewear frequently and replace it immediately if you notice cracking, crazing, pitting, scratching, deformation or other signs of damage.
DO NOT USE THIS EYEWEAR ALONE for operations that expose your eyes to harmful levels of optical radiation such as burning, cutting or welding with torches, electric arc welding, furnace or molten metal operations or glass blowing. Do not use this eyewear for chemical splash or vapor protection, laser light, athletic sports, paintball or simulated combat games. Do not use this eyewear for protection against sever impacts such as explosions, fragmenting grinding, or abrasive wheel donning and fitting.
CLEAN LENSES with water and mild soap solution and dry with a soft cloth. Cleaning eyewear with solvents or other chemicals such as MEK, acetone or toluene may damage the frames, lenses and/or coatings and reduce their protective characteristics
STORE eyewear in a clean area protected from contamination, damage, particulates, debris, direct sunlight, chemicals, high heat or extreme cold.
