Aluminum AN Fittings
AN (Army/Navy) thread is a particular type of fitting used to connect flexible hoses and rigid metal tubing that usually carries fluid. AN sizes differ from bolts and other fitting sizes that refers to the diameter of the bolt where the AN fitting refers to the OD of the tube and have different threads. NOTE: AN 37º and SAE 45º are not interchangeable due to the different flaring angles. Mixing them can cause leakage. AN sizes range from -2 (dash two) to -32 in irregular steps, with each step equating to the OD (outside diameter) of the tubing in 1/16" increments.
- 1
- 2
-
Choose the product options first
RPC #R81012
• General Automotive Applications: Returns, Hydraulic Power, Air Compressor, Fuel & Transmission lines
• General Air Boat Applications: Carb, Returns & Fuel Hose lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81013
• General Automotive Applications: Cooling, Return, Oil, Fuel, Hydraulic & Transmission lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81014
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)
• ReusableAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81015
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel, & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -12 Size
• 3/4" OD Tube
• 3/4" ID Hose
• 1-1/16-12 SAE thread size
• 3/4-15 (NPT) Pipe thread size
• Tool size match: 1-1/4" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA SKU# 859828810151
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81512
• General Automotive Applications: Returns, Hydraulic Power, Air Compressor, Fuel & Transmission lines
• General Air Boat Applications: Carb, Returns & Fuel Hose lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81513
• General Automotive Applications: Cooling, Return, Oil, Fuel, Hydraulic & Transmission lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81514
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All RPC non-electronic Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81515
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -12 Size
• 3/4" OD Tube
• 3/4" ID Hose
• 1-1/16-12 SAE thread size
• 3/4-15 (NPT) Pipe thread size
• Tool size match: 1-1/4" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R84034
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R84035
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)
• ReusableAN -12 Size
• 3/4" OD Tube
• 3/4" ID Hose
• 1-1/16-12 SAE thread size
• 3/4-15 (NPT) Pipe thread size
• Tool size match: 1-1/4" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81532
• General Automotive Applications: Returns, Hydraulic Power, Air Compressor, Fuel & Transmission lines
• General Air Boat Applications: Carb, Returns & Fuel Hose lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)AN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81533
• General Automotive Applications: Cooling, Return, Oil, Fuel, Hydraulic, & Transmission lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)AN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R82001
• General Automotive Applications: Male A Dash Union Pipe Adapter
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -4 Size
• 1/4" OD Tube
• 1/4-18 SAE thread size
• Tool size match: 9/16" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R82017
• General Automotive Applications: Male Union Adapter
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R82018
• General Automotive Applications: Male Union Adapter
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R82019
• General Automotive Applications: Male Union Adapter
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R83713
• General Automotive Applications: Small Fuel, Gauges, Vacuum, Brakes, Clutch Hoses, Air Compressor lines
• General Air Boat Applications: Small Fuel, Gauges & Vacuum Lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -4 Size
• 1/4" OD Tube
• 1/4-18 SAE thread size
• Tool size match: 9/16" Wrench
• 1/4-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R83714
• General Automotive Applications: Flare Plug
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R83715
• General Automotive Applications: Flare Plug
• Finish: Polished Aluminum
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R83716
• General Automotive Applications: Flare Plug
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R83740
• General Automotive Applications: Cap / Female
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R83742
• General Automotive Applications: Cap / Female
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA SKU# 859828837424
-
Choose the product options first
RPC #R82099
• General Automotive Applications: Bulkhead Nut
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -4 Size
• 1/4" OD Tube
• 1/4-18 SAE thread size
• Tool size match: 9/16" Wrench
• 1/4-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R82100
• General Automotive Applications: Bulkhead Nut
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
- 1
- 2