Search
-
Choose the product options first
MARPAC® WON'T STAIN DECKS
• COLOR/FINISH: Blue
• MATERIAL: Nylon
• STYLE: Double Braided
• FLOATS: NO
• SPECIALTY USE: Dockline
• READY TO USE: With pre-splice, ready-to-use 12" eye
• RESISTANT: Won't Stain Decks, Excellent Ultra-Violet Inhibitors, oil, rot & mildew
• SAFE WORKING LOAD: 1,686 lbs.
• TENSILE STRENGTH: N/A Good strength and flexibility
• ADD-ONS: N/A
• STORAGE: Dry
• MINIMUM LENGTH FOR BOW & STERN LINES: 2/3 length of your boat
• TYPICAL SPRING LINE: At the least, equal to the length of your boat
• APPROXIMATE SIZE: 25' L x 5/8" W
• APPROXIMATE WEIGHT: 1.85 lbs.
WARNING: Rope failure can cause serious injury or death. Fiber rope will fail if overloaded, worn, damaged, abused, improperly maintained or used for a purpose other than it's intended use. Do not exceed the safe working limit of the rope.
THE MANUFACTURER ASSUMES NO RESPONSIBILITY FOR INJURY, DAMAGE OR LOSS ARISING FROM THE USE OF THIS PRODUCT, HOWSOEVER CAUSED.
California WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN CHINA
-
Choose the product options first
MARPAC® WON'T STAIN DECKS
• COLOR/FINISH: Blue
• MATERIAL: Nylon
• STYLE: Double Braided
• FLOATS: NO
• SPECIALTY USE: Dockline
• READY TO USE: With pre-splice, ready-to-use 12" eye
• RESISTANT: Won't Stain Decks, Excellent Ultra-Violet Inhibitors, oil, rot & mildew
• SAFE WORKING LOAD: 1,686 lbs.
• TENSILE STRENGTH: N/A Good strength and flexibility
• ADD-ONS: N/A
• STORAGE: Dry
• MINIMUM LENGTH FOR BOW & STERN LINES: 2/3 length of your boat
• TYPICAL SPRING LINE: At the least, equal to the length of your boat
• APPROXIMATE SIZE: 35' L x 5/8" W
• APPROXIMATE WEIGHT: 2.45 lbs.
WARNING: Rope failure can cause serious injury or death. Fiber rope will fail if overloaded, worn, damaged, abused, improperly maintained or used for a purpose other than it's intended use. Do not exceed the safe working limit of the rope.
THE MANUFACTURER ASSUMES NO RESPONSIBILITY FOR INJURY, DAMAGE OR LOSS ARISING FROM THE USE OF THIS PRODUCT, HOWSOEVER CAUSED.
California WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN CHINA
-
Choose the product options first
Manufacturer’s Rubber & Supply
HEAVY DUTY DURABLE RUBBER
• COLOR: Black
• SHAPE:Rectangular Block
• Made with high tensile, abrasion-resistant rubber compounds
• With 2 Mounting Holes (Mounting Hardware Not Included) 2-3/4" center to center of holes
• Hardness: 30 to 90 Durometer Shore A.
• Material Temperature Range: -60°F to 180°F.APPLICATIONS:
Rubber bumpers are used to protect doors, walls, rails, docks, truck bumpers, utility trailers, carts, fork lifts, curbs, rollers, sliders, packers, pushers, conveyors, braces, corners and other places where metal to surface contact is harsh and continuous.MADE IN THE USA
-
Choose the product options first
This automotive oil drain pan is a great way to save money and the environment. The 7-qt. capacity makes it great for changing the Vehicle's oil.
-
Choose the product options first
PART# 7-0578
PERFECT FOR UNDER AIR BOAT SEATS & OVERHEAD LIGHTING
• Light Color: Clear
• Surface Mount
• Material: Stainless Steel Housing & Bezel Trim
• Finish: Polished
• Solid Glass Lens
• Surface Mount
• Exterior Light
• C E Certification
• Pre-wired With On-Off switch
• 12 Volt, 15 Watt Bulbs Included
• Measurement: 4" Lens OD x 5-1/2" Base OD
• Round ShapeIf unfamiliar with this product and installation, seek a professional installer.
-
Choose the product options first
PART# 7-6559 - GREEN STARBOARD & RED PORT
• Vertical Mount
• Attractive Stainless Steel Housing
• 2 Mile Visibility
• Certified USCG 2nm on Boats Under 12 Meters (39.4 ft.) in Length
• Compact Design Mounts Securely On Almost Any Vertical Surface
• Meets The Stringent Requirements For USCG, ABYC A-16, & IMO COLREG
• Excellent For Use On Cabin or Console Sides
• 12 Volt
• LED Advantage of Low Power Use (Only .9W)
• Long Life and Shock Resistant Durability
• Secures with two #8 Flat/Oval Head Screws (Not Included) To Purchase Fasteners Click HereWarning; If unfamiliar with this product and installation, seek a professional installer
-
Choose the product options first
PART# 7-6577 TRANSOM LIGHT
• Marine Grade Stainless Steel Housing
• L.E.D. Advantage of Low Power Use (Only 1.2W) Long Life and Shock Resistant Durability
• Clear Lens
• 2 N. Mile Visibility
• Diameter: 3-1/8"
• 12 Volt
• Meets The Stringent Requirements For USCG, ABYC A-16, and IMO COLREG
• Certified USCG 2nm, For Use On Boat Under 65.5' (10 Meters)
• Secures With two #8 Flat or Oval Head Screws (Not Included) To Purchase Screws Click HereWarning; If unfamiliar with this product and installation, seek a professional installer
-
Choose the product options first
We put together the most popular identification labels used on air boat gauge/Instrument panels.
• Made of Thick Plastic, They Will Never Corrode or Rust
• Fastens With Screws or Glue (Not Included)
• Black on White
• Letters Indented
• Size: 1-3/8" Wide x 1/2" Tall
• Kit Includes: 4 STANDARD LABELS (ON - OFF - BILGE PUMP - TRIM)
4 LIGHT LABELS (SPREADER - FLOOD - RUNNING - COURTESY)MADE IN THE USA
-
Choose the product options first
HEAVY DUTY SS 8" CLEAT
• COLOR/FINISH: Polished
• MATERIAL: 316 Stainless Steel
• TYPICAL USAGE: Hollow Base, Air Boat & Yacht Design
• Use 1/4" Oval Machine Head Screws (Not Included)
• One Piece
• APPROXIMATE SIZE: Cleat 8" L, Foot Mounts .75" L x 2" W
• APPROXIMATE WEIGHT: .80 lbs.
WARNING: If unfamiliar with this product and installation, seek a professional installer.
California WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN CHINA
-
Choose the product options first
USE A #10 SIZE SCREW, BOLT OR RIVET
BENT TIP DESIGN FOR EASE OF APPLICATION
UL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 1.811" MIN. Bundle Diameter .276"
50 Lb. Tensile Strength
RoHS COMPLIANT MFG with 100% Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
USE A #10 SIZE SCREW, BOLT OR RIVET
BENT TIP DESIGN FOR EASE OF APPLICATION
DESIGNED TO RESIST DEGRADATION BY ULTRAVIOLET RAYSUL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 1.811" MIN.Bundle Diameter .276"
50 Lb. Tensile Strength
RoHS COMPLIANT MFG with UV Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
BENT TIP DESIGN FOR EASE OF APPLICATION
DESIGNED TO RESIST DEGRADATION BY ULTRAVIOLET RAYSUL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 2.16" MIN. Bundle Diameter .276"
50 Lb. Tensile Strength
RoHS COMPLIANT MFG with UV Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
MFG BY COOPER BUSSMANN® BRAND
IS THE INDUSTRY STANDARD FOR CIRCUIT PROTECTIONTHE IN-LINE FUSE HOLDER HAS AN ATTACHED HEAVY DUTY WATER RESISTANT COVER.
Comes with (1) one ATC 30 amp blade fuse which are widely used by automotive OEMs.
• 32V/30 AMP Rating
• 8 Inches of T.E.W.
• 4" total Wire Length
• CSA & UL Approved Wire(PLEASE NOTE: ELECTRICAL ITEMS ARE EXCHANGE ONLY)
-
Choose the product options first
MFG BY COOPER BUSSMANN® BRAND IS THE INDUSTRY STANDARD FOR CIRCUIT PROTECTION.
Comes with (1) one ATC 20 amp blade fuse which are widely used by automotive OEMs.
THE IN-LINE FUSE HOLDER HAS AN ATTACHED HEAVY DUTY WATER RESISTANT COVER.
• 32V/30 AMP Rating
• 8 Inches of T.E.W.
• 4" total Wire Length
• CSA & UL Approved Wire(PLEASE NOTE: ELECTRICAL ITEMS ARE EXCHANGE ONLY)
-
Choose the product options first
Generally used for Trailer Spring Hanger Brackets & Shackles
MADE IN TAIWAN SKU# 711910
-
Choose the product options first
Generally used for Trailer Spring Hanger Brackets & Shackles
MADE IN TAIWAN SKU# 706450
-
Choose the product options first
Includes;
(2) 9/16" x 3.00" Bolts # H509-03.00
(2) 9/16" - 12 Nuts # HN5-09 -
Choose the product options first
#70411
• Sold 2 Per Package
• Finish: Polished
• Material: Stainless Steel
• 90º Angle Bracket
• 2 Predrilled Holes Per Leg
• Corrosion Resistance
• 2-3/8" Leg Length
• 9/16" Leg WidthCalifornia Warning: This product contains chemicals known to the State of California to cause cancer and birth defects and other reproductive harm.
MADE IN TAIWAN
-
Choose the product options first
100,000 MILE LIMITED WARRANTY.
Professional Platinum spark plugs maximize the 496 c.i.d. engine performance over time
• Proven to last 100,000 miles
• Shell resistant to corrosion for the life of the plug
• Spark plug gap remains virtually uncharged during the life of the plugSET GAP PER VEHICLE SPECIFICATION
100,000 Miles Limited Warranty against defects in design, materials, and workmanship for complete details, please contact us.
For specific installation instruction, refer to catalog, www.acdelco.com or 1-800-ACDelcoCOMPATIBLE BRANDS: Replacement spark plugs for AC DELCO 41-983:
Brand Model
Autolite APP5245
Brisk GR17LP-5
Denso 5071
Denso PTJ14R15
Denso TJ14R-P15
Denso stk 5325
General Motors 12561454
NGK 5146
NGK PTR4B-15
NGK PZTR5A-15
NGK PZTR5A15
NGK stk 7862Made in Japan
-
Choose the product options first
MFG. BY ACCEL® Trademark of PRESTOLITE PERFORMANCE
• 8mm Universal 8 Cylinder Copper Core
• STRAIGHT Boot, Pre & Post HEI Engines, V-8 Set
• Street Proven
• Performance Value Upgrade with RFI Suppression
• Points and Electronic Ignition CompatibleSUPERSTOCK WIRES
• Applications: Performance upgrade to OE-type/replacement-type ignition system for high spark delivery levels for street driven applications.
• Features: Silicone spark plug boots, yellow, blue, red, & black silicone wire, zinc-plated steel spark plug terminals
• Benefits: Efficient transmitter of ignition energy, popular priced performance, oversized upgrade where OE is 7mm
• Construction: 450º F-rated silicone jacket is extruded over tightly woven rugged fiberglass braid & EPDM (Ethylene Propylene Diene Monomer) rubber construction inner insulation for ignition wire performance that exceeds SAE specifications
• Core: Carbon/graphite conductive material, high resistance suppression, Fiberglass/KEVLAR, 3000-7000 Ohms per foot resistance, with tinned copper core.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water, Engine & Components may be HOT! Always allow to cool off before performing any Maintenance. Before working on electrical system, disconnect battery. Consult your service manual.MADE IN CHINA
-
Choose the product options first
MFG. BY ACCEL® Trademark of PRESTOLITE PERFORMANCE
• 8mm Universal 8 Cylinder Copper Core
• 90º Boot, Pre & Post HEI Engines, V-8 Set
• Street Proven
• Performance Value Upgrade with RFI Suppression
• Points and Electronic Ignition CompatibleSUPERSTOCK WIRES
• Applications: Performance upgrade to OE-type/replacement-type ignition system for high spark delivery levels for street driven applications.
• Features: Silicone spark plug boots, yellow, blue, red, & black silicone wire, zinc-plated steel spark plug terminals
• Benefits: Efficient transmitter of ignition energy, popular priced performance, oversized upgrade where OE is 7mm
• Construction: 450º F-rated silicone jacket is extruded over tightly woven rugged fiberglass braid & EPDM (Ethylene Propylene Diene Monomer) rubber construction inner insulation for ignition wire performance that exceeds SAE specifications
• Core: Carbon/graphite conductive material, high resistance suppression, Fiberglass/KEVLAR, 3000-7000 Ohms per foot resistance, with tinned copper core.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water, Engine & Components may be HOT! Always allow to cool off before performing any Maintenance. Before working on electrical system, disconnect battery. Consult your service manual.MADE IN CHINA
-
Choose the product options first
MARPAC TIGHTEN UP® PROVIDES COMFORT & SAFETY FOR ALL WATER ACTIVITIES
• U.S. COAST GUARD APPROVED (TYPE III)
• SIZE: Adult Universal Over 90 lbs.
• CHEST SIZE: 30" to 52"
• COLOR: Blue
• MATERIAL: 200 Denier Polyester Construction. Foam -Durable Lightweight Foam Fits Snug, Won't Limit Your Mobility
• ADJUSTABLE BELT: Yes (1" width)
• SIDE TYPE: Open-sided styling for adjustability. Large Armholes for Greater Mobility.
• CHILDS HEAD HELP: N/A
• CHEST STRAP, HOOKS OR D-RING: Chest Strap Yes
• MINIMUM ADULT BUOYANCY: 15.5 lbs.
• SAFETY REFLECTORS: None
• APPROXIMATE OVERALL SIZE: 20" L x 21" W x 3" D
• APPROXIMATE WEIGHT: 1.12 lb.
• THINK SAFE BOOKLET: Included
• PUT YOUR NAME ON YOUR PFD IF YOU ARE THE ONLY WEARER!
• DO NOT ATTACH PFD TO YOUR BOAT!
• TYPE III PFD FLOTATION AID: INTENDED USES: Good for calm, inland water, or where there is a good chance of fast rescue. ADVANTAGES: Generally the most comfortable type for continuous wear. Designed for general boating activity that is marked on the device. Available in many styles, including vests and floatation coats. DISADVANTAGES: Wearer may have to tilt head back to avoid going face down. In rough water, a wearer's face may often be covered by waves. Not for extended survival in rough waters.
WARNING!: DO NOT ALTER YOUR PFD!, Don't Put Heavy Objects On Your PFD. Do Not Use Your PFD As a Kneeling Pad or Boat Fender. Don't Leave Your PFD's On Board For Long Periods When The Boat Is Not In Use.
CARING FOR YOUR PFD: Let your PFD drip dry thoroughly before putting it away. Always stow it in a well-ventilated place. Never dry your PFD on a radiator, heater, or any other direct heat source. Do not dry clean.
CHECKING YOUR PDF: Try it on in shallow water, tilt your head back, relax and allow your feet to rise in the water, and feel if the buoyancy is comfortable to keep you afloat. Check for any rips, tears, and holes, and to see that seams, fabric straps, and hardware are okay. Give your PFD bellts and tie tapes a quick, hard pull to make sure they are secure. There should be no signs of water logging, mildew odor, or shrinkage of the buoyant materials. FADING CAN INDICATE LOSS OF STRENGTH. A weathered PFD could tear easily, resulting in loss of flotation material. Throw it away and buy a new one.
CHECK YOUR PFD EACH SEASON: The Law States your PFD's Must Be In Good Shape before You Use Your Boat. Ones That Are Not In Good Shape Should Be Cut Up and Thrown Away.
UL MARINE LISTED:
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options firstAdult Universal Over 90 Lbs. Foam Yoke Vest, Camouflage, Type 2 USCG Approved, Chest Size: 30" - 52"
FLOWT®
• U.S. COAST GUARD APPROVED (TYPE II) #160.064/4534/0 USCG approved wearable device for uninspected commercial vessels less than 40 feet (12m) in length not carrying passengers for hire, and for recreational boats. Not approved for use on personal water craft for water skiing, or similar towed uses.
• SIZE: Adult Universal Over 90 lbs.
• CHEST SIZE: 30" to 52"
• COLOR: Camouflage
• MATERIAL: Foam
• ADJUSTABLE BELT: Yes (1" width) Snap in Plastic Buckle
• SIDE TYPE: None
• CHILDS HEAD HELP: N/A
• CHEST STRAP, HOOKS OR D-RING: None
• MINIMUM ADULT BUOYANCY: 15.5 lbs.
• SAFETY REFLECTORS: None
• APPROXIMATE OVERALL SIZE: 21" L x 12" W x 3" D
• APPROXIMATE WEIGHT: .6 lb.
• THINK SAFE BOOKLET: Included
• PUT YOUR NAME ON YOUR PFD IF YOU ARE THE ONLY WEARER!
• DO NOT ATTACH PFD TO YOUR BOAT!
• TYPE II PFD NEAR SHORE BUOYANT VEST; INTENDED USES: General Purpose. Good for calm, inland water, or where there is a good chance of fast rescue. ADVANTAGES: Less bulky, more comfortable to wear than a Type I PFD. Keeps most unconscious wearer's face up in water. DISADVANTAGES: Not for Long Hours in Rough Water. Will Not Turn Some Unconscious Wearers Face-Up in Water. May be uncomfortable after wearing for extended periods. Will not turn as many people face-up as Type I PFD will. In rough waters a wearer's face may be covered by waves. Not for extended survival in rough waters.
WARNING!: DO NOT ALTER YOUR PFD!, Don't Put Heavy Objects On Your PFD. Do Not Use Your PFD As a Kneeling Pad or Boat Fender. Don't Leave Your PFD's On Board For Long Periods When The Boat Is Not In Use.
CARING FOR YOUR PFD: Let your PFD drip dry thoroughly before putting it away. Always stow it in a well-ventilated place. Never dry your PFD on a radiator, heater, or any other direct heat source. Do not dry clean.
CHECKING YOUR PDF: Try it on in shallow water, tilt your head back, relax and allow your feet to rise in the water, and feel if the buoyancy is comfortable to keep you afloat. Check for any rips, tears, and holes, and to see that seams, fabric straps, and hardware are okay. Give your PFD belts and tie tapes a quick, hard pull to make sure they are secure. There should be no signs of water logging, mildew odor, or shrinkage of the buoyant materials. FADING CAN INDICATE LOSS OF STRENGTH. A weathered PFD could tear easily, resulting in loss of flotation material. Throw it away and buy a new one.
CHECK YOUR PFD EACH SEASON: The Law States your PFD's Must Be In Good Shape before You Use Your Boat. Ones That Are Not In Good Shape Should Be Cut Up and Thrown Away.
UL MARINE LISTED NEAR SHORE BUOYANT VEST ISSUE NO. L-7527
MADE IN CHINA
-
Choose the product options first
FLOWT®
• U.S. COAST GUARD APPROVED (TYPE II) #160.064/4534/0 USCG approved wearable device for uninspected commercial vessels less than 40 feet (12m) in length not carrying passengers for hire, and for recreational boats. Not approved for use on personal water craft for water skiing, or similar towed uses.
• SIZE: Adult X-Large Over 90 lbs.
• CHEST SIZE: Unknown
• COLOR: Camouflage
• MATERIAL: Foam
• ADJUSTABLE BELT: Yes (1" width) Snap in Plastic Buckle
• SIDE TYPE: None
• CHILDS HEAD HELP: N/A
• CHEST STRAP, HOOKS OR D-RING: None
• MINIMUM ADULT BUOYANCY: 15.5 lbs.
• SAFETY REFLECTORS: None
• APPROXIMATE OVERALL SIZE: 24.01" L x 12" W x 3" D
• APPROXIMATE WEIGHT: .92 lb.
• THINK SAFE BOOKLET: Included
• PUT YOUR NAME ON YOUR PFD IF YOU ARE THE ONLY WEARER!
• DO NOT ATTACH PFD TO YOUR BOAT!
• TYPE II PFD NEAR SHORE BUOYANT VEST; INTENDED USES: General Purpose. Good for calm, inland water, or where there is a good chance of fast rescue. ADVANTAGES: Less bulky, more comfortable to wear than a Type I PFD. Keeps most unconscious wearer's face up in water. DISADVANTAGES: Not for Long Hours in Rough Water. Will Not Turn Some Unconscious Wearers Face-Up in Water. May be uncomfortable after wearing for extended periods. Will not turn as many people face-up as Type I PFD will. In rough waters a wearer's face may be covered by waves. Not for extended survival in rough waters.
WARNING!: DO NOT ALTER YOUR PFD!, Don't Put Heavy Objects On Your PFD. Do Not Use Your PFD As a Kneeling Pad or Boat Fender. Don't Leave Your PFD's On Board For Long Periods When The Boat Is Not In Use.
CARING FOR YOUR PFD: Let your PFD drip dry thoroughly before putting it away. Always stow it in a well-ventilated place. Never dry your PFD on a radiator, heater, or any other direct heat source. Do not dry clean.
CHECKING YOUR PDF: Try it on in shallow water, tilt your head back, relax and allow your feet to rise in the water, and feel if the buoyancy is comfortable to keep you afloat. Check for any rips, tears, and holes, and to see that seams, fabric straps, and hardware are okay. Give your PFD belts and tie tapes a quick, hard pull to make sure they are secure. There should be no signs of water logging, mildew odor, or shrinkage of the buoyant materials. FADING CAN INDICATE LOSS OF STRENGTH. A weathered PFD could tear easily, resulting in loss of flotation material. Throw it away and buy a new one.
CHECK YOUR PFD EACH SEASON: The Law States your PFD's Must Be In Good Shape before You Use Your Boat. Ones That Are Not In Good Shape Should Be Cut Up and Thrown Away.
UL MARINE LISTED NEAR SHORE BUOYANT VEST ISSUE NO. L-7527
MADE IN CHINA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.