Fuel Hose Lines & Fittings
- 1
- 2
-
Choose the product options first
#TS816 (Unskinned-Not Carded)
• General Applications: Automotive Fuel Hose & Lines
• Finish: Chromed Aluminum
• Material: Aluminum
• Won't rust
• Straight Fitting
• 3/8" NPT Male x 3/8" Hose ID Barb SizeWARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
#TS820 (Unskinned-Not Carded)
• General Engine Applications: Fuel Hose Lines
• Finish: Chromed
• Material: Aluminum
• Won't rust
• Hex Head Plug Fitting
• 3/8" NPT ID with Hex Head
• 3/4" Total Fitting LengthWARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water, Engine & Components may be HOT! Always allow to cool off before performing any Maintenance. Before working on electrical system, disconnect battery. Consult your service manual. -
Choose the product options first
#R82208
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Hex Head Plug Fitting
• 1/2" NPT ID with Hex Head
• 1" Total Fitting LengthWARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water, Engine & Components may be HOT! Always allow to cool off before performing any Maintenance. Before working on electrical system, disconnect battery. Consult your service manual.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.RPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.Engineered in the USA
-
Choose the product options first
IDEAL TRIDON® PROVEN DESIGNS, BILLIONS OF TIMES
HEAVY DUTY THICK DESIGN
SAE SIZE 04
• All Stainless Steel, Clamp and Slotted Standard Head Hex Screw (Included)
• Marine Tough Clamping
• Eliminate Rust and Corrosion ProblemsMADE IN THE USA
-
Choose the product options first
SIERRA® #18-8072
• Typical Air Boat Application: Engine Fuel Pump
• Replaces OMC 174177WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.MADE IN THE USA
-
Choose the product options first
MARPAC® #7-1649
• Typical Air Boat Application: Engine Fuel Pump
• Replaces OMC 174177
• Solid Machined Brass
• Excellent for use in tight spacesWARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.MADE IN THE USA
-
Choose the product options first
RPC® Racing Power Company PART# R6678
Quality Performance PartsColor/Finish: Chrome Pro-Hex Matching Color Fittings
Fitting Material: Machined Aluminum
Sleeving Cuts Easily With Scissors
Braided Steel Kit Includes;
• (1) 3 ft. Vacuum Hose Sleeving With (4) Shrink Sleeves Are Shrink Fit and Not Aluminum Hose Ends
• (1) 4 ft. Fuel Line Hose Sleeving With (4) Pro-Hex Fittings
• (1) 12 ft. Heater Hose Sleeving With (4) Pro-Hex Fittings
• (1) 4.5 ft. Upper Radiator Hose Sleeving With (2) Pro-Hex Fittings
WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water may be HOT! Always allow to cool off before performing any Radiator, Hose or Fitting Maintenance.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.RPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.Engineered in the USA
-
Choose the product options first
RPC® Racing Power Company PART# R6677
Quality Performance PartsColor/Finish: Blue Pro-Hex Matching Color Fittings
Fitting Material: Machined Aluminum
Sleeving Cuts Easily With Scissors
Braided Steel Kit Includes;
• (1) 3 ft. Vacuum Hose Sleeving With (4) Shrink Sleeves Are Shrink Fit and Not Aluminum Hose Ends
• (1) 4 ft. Fuel Line Hose Sleeving With (4) Pro-Hex Fittings
• (1) 12 ft. Heater Hose Sleeving With (4) Pro-Hex Fittings
• (1) 4.5 ft. Upper Radiator Hose Sleeving With (2) Pro-Hex Fittings
WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water may be HOT! Always allow to cool off before performing any Radiator, Hose or Fitting Maintenance.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.RPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.Engineered in the USA
-
Choose the product options first
RPC® Racing Power Company PART# R6675
Quality Performance PartsColor/Finish: Purple Pro-Hex Matching Color Fittings
Fitting Material: Machined Aluminum
Sleeving Cuts Easily With Scissors
Braided Steel Kit Includes;
• (1) 3 ft. Vacuum Hose Sleeving With (4) Shrink Sleeves Are Shrink Fit and Not Aluminum Hose Ends
• (1) 4 ft. Fuel Line Hose Sleeving With (4) Pro-Hex Fittings
• (1) 12 ft. Heater Hose Sleeving With (4) Pro-Hex Fittings
• (1) 4.5 ft. Upper Radiator Hose Sleeving With (2) Pro-Hex Fittings
WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing any parts on engine components. Radiator Water may be HOT! Always allow to cool off before performing any Radiator, Hose or Fitting Maintenance.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.RPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.Engineered in the USA
-
Choose the product options first
RPC #R82001
• General Automotive Applications: Male A Dash Union Pipe Adapter
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -4 Size
• 1/4" OD Tube
• 1/4-18 SAE thread size
• Tool size match: 9/16" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R84034
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81532
• General Automotive Applications: Returns, Hydraulic Power, Air Compressor, Fuel & Transmission lines
• General Air Boat Applications: Carb, Returns & Fuel Hose lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)AN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81533
• General Automotive Applications: Cooling, Return, Oil, Fuel, Hydraulic, & Transmission lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)AN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81012
• General Automotive Applications: Returns, Hydraulic Power, Air Compressor, Fuel & Transmission lines
• General Air Boat Applications: Carb, Returns & Fuel Hose lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81013
• General Automotive Applications: Cooling, Return, Oil, Fuel, Hydraulic & Transmission lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81014
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)
• ReusableAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81015
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel, & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon braided (Not teflon)
• ReusableAN -12 Size
• 3/4" OD Tube
• 3/4" ID Hose
• 1-1/16-12 SAE thread size
• 3/4-15 (NPT) Pipe thread size
• Tool size match: 1-1/4" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA SKU# 859828810151
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R84035
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality hose type of Steel Braided, Stainless Steel Braided or Nylon Braided (Not teflon)
• ReusableAN -12 Size
• 3/4" OD Tube
• 3/4" ID Hose
• 1-1/16-12 SAE thread size
• 3/4-15 (NPT) Pipe thread size
• Tool size match: 1-1/4" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81512
• General Automotive Applications: Returns, Hydraulic Power, Air Compressor, Fuel & Transmission lines
• General Air Boat Applications: Carb, Returns & Fuel Hose lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81513
• General Automotive Applications: Cooling, Return, Oil, Fuel, Hydraulic & Transmission lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -8 Size
• 1/2" OD Tube
• 1/2" ID Hose
• 3/4-16 SAE thread size
• 1/2"-14 (NPT) Pipe thread size
• Tool size match: 7/8" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81514
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -10 Size
• 5/8" OD Tube
• 5/8" ID Hose
• 7/8-14 SAE thread size
• Tool size match: 1" WrenchRPC's Limited Warranty
All RPC non-electronic Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R81515
• General Automotive Applications: Heater Hoses, Power Steering Pump, Cooling, Oil, Fuel & Transmission lines
• General Air Boat Applications: Cooling, Oil, & Fuel lines
• Finish: Anodized Red/Blue
• Material: Aluminum
• Won't Rust
• Up to 200 psi is fine, over 250 psi could cause hose to detach
• Use with a quality push-on hose type
• Not reusable, to remove cut hose off at end or slit hose length waysAN -12 Size
• 3/4" OD Tube
• 3/4" ID Hose
• 1-1/16-12 SAE thread size
• 3/4-15 (NPT) Pipe thread size
• Tool size match: 1-1/4" WrenchRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
Photo may be from the manufacturer provided for reference. The manufacturer may use the same photo to represent all variations of a product or show the product in use with other parts that may be sold separately.
-
Choose the product options first
RPC #R83713
• General Automotive Applications: Small Fuel, Gauges, Vacuum, Brakes, Clutch Hoses, Air Compressor lines
• General Air Boat Applications: Small Fuel, Gauges & Vacuum Lines
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -4 Size
• 1/4" OD Tube
• 1/4-18 SAE thread size
• Tool size match: 9/16" Wrench
• 1/4-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
-
Choose the product options first
RPC #R83714
• General Automotive Applications: Flare Plug
• Finish: Anodized Blue
• Material: Aluminum
• Won't rust
• Up to 200 psi is fine, over 250 psi could cause hose to detachAN -6 Size
• 3/8" OD Tube
• 3/8" ID Hose
• 9/16-18 SAE thread size
• Tool size match: 11/16" Wrench
• 3/8-18 (NPT) Pipe thread sizeRPC's Limited Warranty
All non-electronic RPC Products are warranted to be free from defects in material or workmanship for a period of ONE YEAR from date of purchase to the original purchaser. During this time, RPC will at it's option, credit or replace any defective product. RPC shall not be liable from any consequential or contingent damages, labor expenses, freight costs or injuries arising either directly or indirectly from any defects in these products or from the use of the product. You may have other rights under either State or Federal law, including laws governing warranties.WARNING
If unfamiliar with this product and installation, seek a professional installer. Periodically check fitting and any element or hose for leaks. Gasoline is highly flammable and explosive under certain conditions. Avoid spilling gasoline, always turn off engine and do not allow flames in the area while installing a fitting on engine components.APPLICATION WARNING
Many parts available from RPC are intended for "off-highway" applications only. The descriptions pertain to engine and/or vehicle usage off the public roads or used on air boats. Federal and/or State laws restrict the removal or modification of any required emission control systems on a car or truck. Use of vehicle for off-road purposes may be exempt from these regulations, but always check your own Local and State laws.Engineered in the USA
- 1
- 2
-
Choose the product options first
-
Choose the product options first