Search
-
Choose the product options first
COMMONLY USED FOR POLYMER SHEETS
California Warning: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.
MADE IN TAIWAN
-
Choose the product options first
BENT TIP DESIGN FOR EASE OF APPLICATION
DESIGNED TO RESIST DEGRADATION BY ULTRAVIOLET RAYSUL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 3" MIN. Bundle Diameter .062"
50 Lb. Tensile Strength
RoHS COMPLIANT MFG with UV Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
BENT TIP DESIGN FOR EASE OF APPLICATION
UL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 2.756" MIN. Bundle Diameter .276"
50 Lb. Tensile Strength
RoHS COMPLIANT MFG with 100% Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
BENT TIP DESIGN FOR EASE OF APPLICATION
DESIGNED TO RESIST DEGRADATION BY ULTRAVIOLET RAYSUL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 4.016" MIN. Bundle Diameter .276"
50 Lb. Tensile Strength
RoHS COMPLIANT MFG with UV Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connections
Use for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing.Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE U.S.A.
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
U.S.C.G. regulates that you must have exhaust on air boats.
So Make it Stainless and Make it Last.2.50" Inch I.D. X 25' Foot Length Coil
HEAVY DUTY STAINLESS STEEL (.018 - .020)NON-MAGNETIC
100% MADE IN THE USA
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! Size: 2-3/4"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
HEAVY DUTY
DESIGNED TO RESIST DEGRADATION BY ULTRAVIOLET RAYSUL APPROVED MFG IN A ISO-9002 FACILITY
Operating Temperature Range (-40º TO 185º DEG F.)
MAX. Bundle Diameter 5.50" MIN. Bundle Diameter .55"
175 Lb. Tensile Strength
RoHS COMPLIANT MFG with UV Nylon Non Metallic Material
TRANSPORT & STORE AT ROOM TEMP.73º F. -
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connections
Use for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing. Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! Size: 3.50"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
INCLUDES;
• 2 Bolts
• 2 Nuts
• Foil Attaching HardwareHEAVY DUTY QUALITY MADE IN THE U.S.A.
• FLAT - NO STEP
• NO WELDING REQUIRED
• FOR O.D. TUBING TO I.D. SLOTTED TUBING
• JOINING O.D. TUBING TO I.D. FLEXIBLE TUBING
• CONFORMS TO SHAPE OF PIPE OR FLEX
• PREVENTS PIPE DISTORTION
• NO DISCONNECTING PIPEINSTALLATION INSTRUCTIONS
The Exhaust Clamp seals flexible tube to straight pipe and straight tube to straight tube connectionsUse for overlap connections only. Position clamp halfway onto the larger diameter tube. Assemble bolts and position gasket between clamp bolts and tubing.Torque the LARGE DIAMETER first, then torque the small diameter, Torque to 50-75 lbs.
NOTE:
Do not use as a mounting support for exhaust system.
Do not use a butt joint clamp.
Do not use turbocharger or exhaust manifold connections.
Reuse is not recommended.FOR EASIER INSTALLATION:
GREASE THE CLAMP AND THE JOINT AREA BEFORE INSTALLING. CLEAN ALL RUST AND DEBRIS FROM SURFACES.MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product may contain chemicals, known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
U.S.C.G. regulates that you must have exhaust on air boats.
So Make it Stainless and Make it Last.3.50" Inch I.D. X 25' Foot Length Coil
HEAVY DUTY STAINLESS STEEL (.018 - .020)NON-MAGNETIC
100% MADE IN THE USA
-
Choose the product options first
BOATER SPORTS® D.O.T. APPROVED
High Visibility
Amber Rectangle
1 Pair
1 - 1/2" H x 3" L
DIRECTIONS: Choose a flat area to apply. Clean application surface area. Remove the paper back from the reflector and press sticky side firmly against installation surface.MADE IN TAIWAN 763562593204
-
Choose the product options first
BOATER SPORTS®
• D.O.T. APPROVED
• High Visibility
• RED Rectangle
• 1 Pair
• 1 - 1/2" x 3"
DIRECTIONS: Choose a flat area to apply. Clean application surface area. Remove the paper back from the reflector and press sticky side firmly against installation surface.
CALIFORNIA WARNING: This product may contain lead, a substance known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN TAIWAN
-
Choose the product options first
STRONGEST IN THE INDUSTRY!! Size: 3"
HEAVY DUTY EXHAUST CLAMPS With Rounded U-Bolt
FEATURES:
• Extra Long MIG-Welded Side Seams
• Super Strong 11 Gauge Saddle
• High Strength 3/8" U-Bolt
• Corrosion-Resistant Bright Zinc Plating
• Continuous Welded Seam
• Serrated Flanged Nuts (2 Included)
Clamps are individually cold-packaged, showing Part Number
100% MADE IN THE USA
CALIFORNIA PROP 65 WARNING: This product contains lead, a product known to the state of California to cause cancer and birth defects and other reproductive harm.
-
Choose the product options first
MADE IN TAIWAN SKU# 703082
-
Choose the product options first
MOSSY OAK® MARINE
• COLOR/FINISH: Brown/Black/Green
• MATERIAL: Multifilament Polypropylene (Floats)
• STYLE: Diamond Braided
• FLOATS: Yes
• SPECIALTY USE: Utility line
• RESISTANT: Ultra-Violet Inhibitors, abrasion, oil, rot & mildew
• SAFE WORKING LOAD: 60 lbs.
• TENSILE STRENGTH: 240 lbs. High Tenacity
• ADD-ONS: N/A
• STORAGE: Dry or Wet
• MINIMUM LENGTH FOR BOW & STERN LINES: N/A
• TYPICAL SPRING LINE: N/A
• APPROXIMATE SIZE: 50' L x 3/16" W
• APPROXIMATE WEIGHT: 6 oz
WARNING: Rope failure can cause serious injury or death. Fiber rope will fail if overloaded, worn, damaged, abused, improperly maintained or used for a purpose other than it's intended use. Do not exceed the safe working limit of the rope.
THE MANUFACTURER ASSUMES NO RESPONSIBILITY FOR INJURY, DAMAGE OR LOSS ARISING FROM THE USE OF THIS PRODUCT, HOWSOEVER CAUSED.
California WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN CHINA
-
Choose the product options first
MARPAC® WON'T STAIN DECKS
• COLOR/FINISH: Black
• MATERIAL: Nylon
• STYLE: Double Braided
• FLOATS: NO
• SPECIALTY USE: Dockline
• READY TO USE: With pre-splice, ready-to-use 12" eye
• RESISTANT: Won't Stain Decks, Excellent Ultra-Violet Inhibitors, oil, rot & mildew
• SAFE WORKING LOAD: 1,980 lbs.
• TENSILE STRENGTH: N/A Good strength and flexibility
• ADD-ONS: N/A
• STORAGE: Dry
• MINIMUM LENGTH FOR BOW & STERN LINES: 2/3 length of your boat
• TYPICAL SPRING LINE: At the least, equal to the length of your boat
• APPROXIMATE SIZE: 30' L x 3/4" W
• APPROXIMATE WEIGHT: 2.5 lbs.
WARNING: Rope failure can cause serious injury or death. Fiber rope will fail if overloaded, worn, damaged, abused, improperly maintained or used for a purpose other than it's intended use. Do not exceed the safe working limit of the rope.
THE MANUFACTURER ASSUMES NO RESPONSIBILITY FOR INJURY, DAMAGE OR LOSS ARISING FROM THE USE OF THIS PRODUCT, HOWSOEVER CAUSED.
California WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN CHINA
-
Choose the product options first
MARPAC® WON'T STAIN DECKS
• COLOR/FINISH: Black
• MATERIAL: Nylon
• STYLE: Double Braided
• FLOATS: NO
• SPECIALTY USE: Dockline
• READY TO USE: With pre-splice, ready-to-use 12" eye
• RESISTANT: Won't Stain Decks, Excellent Ultra-Violet Inhibitors, oil, rot & mildew
• SAFE WORKING LOAD: 1,980 lbs.
• TENSILE STRENGTH: N/A Good strength and flexibility
• ADD-ONS: N/A
• STORAGE: Dry
• MINIMUM LENGTH FOR BOW & STERN LINES: 2/3 length of your boat
• TYPICAL SPRING LINE: At the least, equal to the length of your boat
• APPROXIMATE SIZE: 35' L x 3/4" W
• APPROXIMATE WEIGHT: 3 lbs.
WARNING: Rope failure can cause serious injury or death. Fiber rope will fail if overloaded, worn, damaged, abused, improperly maintained or used for a purpose other than it's intended use. Do not exceed the safe working limit of the rope.
THE MANUFACTURER ASSUMES NO RESPONSIBILITY FOR INJURY, DAMAGE OR LOSS ARISING FROM THE USE OF THIS PRODUCT, HOWSOEVER CAUSED.
California WARNING: This product contains chemicals known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN CHINA
-
Choose the product options first
California Warning: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.
MADE IN CHINA
-
Choose the product options first
Commonly used on street signs, airboat or hunting camp signs, and Boat Trailers.
California Warning: This product contains chemical known to the State of California to cause birth defects or other reproductive harm.
MADE IN CHINA
-
Choose the product options first
MADE IN TAIWAN SKU# 715291
-
Choose the product options first
MADE IN TAIWAN SKU# 715291
-
Choose the product options first
Fits Most Standard Size Trailer Winch Stand U-Bolts
MADE IN CHINA SKU# 715061