Trailering
Florida Trailer Law requires brakes on trailers with a gross weight tabulation (GWT) 3,000 lbs or more, airboat trailers generally do not meet this criteria provided it shall not exceed 40% of the gross weight of the towing vehicle when connected to the trailer and the combination of vehicles, consisting of the towing vehicle and its total towed load, is capable of complying with the performance requirements of s. 316.262. Trailers over 2,500 lbs must be titled and all trailers must be registered, licensed plated and current year registration decal applied. All running, signaling and brake lights, tires, hitching, chains and tie downs must comply to Department of Transportation and your state's highway approved requirements. Trailers used for governments, farming, rural, or agricultural purposes have certain exemptions that may apply.
-
Choose the product options first
BOATER SPORTS® D.O.T. APPROVED
High Visibility
Amber Rectangle
1 Pair
1 - 1/2" H x 3" L
DIRECTIONS: Choose a flat area to apply. Clean application surface area. Remove the paper back from the reflector and press sticky side firmly against installation surface.MADE IN TAIWAN 763562593204
-
Choose the product options first
BOATER SPORTS®
• D.O.T. APPROVED
• High Visibility
• RED Rectangle
• 1 Pair
• 1 - 1/2" x 3"
DIRECTIONS: Choose a flat area to apply. Clean application surface area. Remove the paper back from the reflector and press sticky side firmly against installation surface.
CALIFORNIA WARNING: This product may contain lead, a substance known to the state of California to cause cancer and birth defects and other reproductive harm.
MADE IN TAIWAN
-
Choose the product options firstOnly 1 left in stock
MFG BY WESBAR® DESIGNED WITH "WISHBONE" WIRING
To Allow For Installation Down Both Sides Of Trailer With Same HarnessCOLOR CODED FOR EASY TRACKING.
WHITE = GROUND
BROWN = RUNNING LIGHTS
GREEN = RIGHT TURN AND RIGHT BRAKE LIGHT
YELLOW = LEFT TURN AND LEFT BRAKE LIGHT
BROWN/GREEN = RIGHT SIDE RUNNING LIGHTS
BROWN/YELLOW = LEFT SIDE RUNNING LIGHTS• Quick and Easy to Install
• All Wiring is 18 Gauge
• Plug and Play T-harnesses to connect to vehicle wiring
• Trailer wiring connectors for both truck and trailer -
Choose the product options first
MFG BY WESBAR® DESIGNED WITH "WISHBONE" WIRING
To Allow For Installation Down Both Sides Of Trailer With Same HarnessCOLOR CODED FOR EASY TRACKING.
WHITE = GROUND
BROWN = RUNNING LIGHTS
GREEN = RIGHT TURN AND RIGHT BRAKE LIGHT
YELLOW = LEFT TURN AND LEFT BRAKE LIGHT
BROWN/GREEN = RIGHT SIDE RUNNING LIGHTS
BROWN/YELLOW = LEFT SIDE RUNNING LIGHTS
• Quick and Easy to Install.
• All Wiring is 18 Gauge
• Plug and Play T-harnesses to connect to vehicle wiring
• Trailer wiring connectors for both truck and trailer -
Choose the product options first
POLLAK® #12-717 EZ Trailer Adapter
To the heavy duty truck operator or the weekend boater/camper, Pollak has always symbolized quality
• Unskinned (Not packaged)
• Allows for one vehicle to tow utility or boat trailers.
• Converts 6-way Round (Pin Style) Connector Socket (On Vehicle) to a 4-way Flat Connector Plug (On Trailer).
• Full-length plug shell insures positive latching with socket.
• Adapter has non-corrosive glass-filled nylon shell and fits all 6-way sockets.
• Eliminates makeshift jumpers
• Non-corrosive nylon shell12-717 Pollak 6-Way to 4-Way Connector Adapter Replaces 37308 Similar to 37325
-
Choose the product options first
POLLAK® #12-718 EZ Trailer Adapter
To the heavy duty truck operator or the weekend boater/camper, Pollak has always symbolized quality.
• Unskinned (Not packaged)
• Converts 7-way Blade Connector Socket to a 5-way Molded Connector.
• Allows one vehicle to tow campers or boat trailers that require an electric brake circuit.
• Connects ground, left-turn, right-turn, and stop circuits.
• Adapter has non-corrosive glass-filled nylon shell and fits all OEM and Aftermarket RV 7-way sockets
• Including Pollak's new 11-893 sealed socket.
• Features quick and easy plug in installation
• Full length plug shell insures positive latching with socket.
• Designed to eliminate makeshift jumpers allowing for one vehicle to tow trailers with or without electrical brakes.
• Non-corrosive nylon shell -
Choose the product options first
• Armored Hardened Steel Shackle Defies Cutting!
• 1-9/16" Laminated Steel Body for Superior Strength
• 4 Pin Tumbler Cylinder Helps Prevent Picking
• 3/4" Armored Shackle Guard For Exceptional Bolt Cutters, Hack Saws & Pry Resistance
• Removable Shackle Sleeve for Application Flexibility
• Hardened Steel Shackle for additional Resistance to Picking
• Tough Under Fire
• LIMITED LIFETIME WARRANTY - www.masterlock.com
• STORE YOUR KEY COMBINATION NUMBER FOR FUTURE REPLACEMENTS
ASSEMBLED IN MEXICO
-
Choose the product options first
WELCOME TO MIAMI! If you live here, you should have 2 locks on your trailer, one that guards against towing and another for the coupler that is a bolt cutter deterrent type. Much theft has occurred when trailers are left unsupervised at dock/boat parking lots, even with bolt cutter deterrent types they will hitch up and cut off the coupler later. With this added tow-away lock used with a bolt deterrent type lock will guard your trailer twice as much.
Guards Against Trailer Tow-away Theft
Advanced Locking Mechanism Resists Picking and Prying
Works With All 1-7/8", 2", & 2-5/16" Couplers
Easy To Install and Remove
Durable Cast Body Resist Rust and Corrosion
Oil Occasionally
IMPORTANT! Record key number. Contact Us if you should happen to lose your keys and your key #, we try to keep them on file for you. Also contact Carquest Performance Products Inc. for key replacements.
Cequent Performance Products, Inc. (Fulton)
MADE IN CHINA 742512632262
-
Choose the product options first
MASTER LOCK® FINEST!
FITS 1-7/8" & 2" COUPLERS
MADE OF SOLID BRASS W/ STAINLESS STEEL SHACKLE PIN
WELCOME TO MIAMI! If you live here, you should have 2 locks on your trailer, one that guards against towing and another for the coupler that is a bolt cutter deterrent type. Much theft has occurred when trailers are left unsupervised at dock/boat parking lots, even with bolt cutter deterrent types they will hitch up and cut off the coupler later. With this added towaway lock used with a bolt deterrent type lock will guard your trailer twice as much.
071649047954
-
Choose the product options first
BOATER SPORTS®
ZINC PLATED AND INCLUDES COTTER HAIRPIN
5/8" DIAMETER
4-1/2" TOTAL LENGTHMADE IN CHINA 763562594164
-
Choose the product options first
BOATER SPORTS®
Serves A Variety Of Different Uses1/4" STEEL SHAFT PIN DIAMETER
1-3/4" INSIDE WIDE (REDUCES ON CURVES)
1-1/2" CENTER - TALL INSIDE CLEARANCE (REDUCES ON CURVES)
2" X 2" AVERAGE OVERALL DIMENSIONSMADE IN CHINA 7635625940010
-
Choose the product options first
-
Choose the product options first
BUDDY BEARING® BRA #19B Used in the manufacturing of all Swait Airboat Trailers.
• Set of 2 per carded package
• Packaging: Carded
• Fits Buddy Bearing Models; 1980, 1938, 1968, 2080, 2047 and the same in SS
• Bra is easily removed for checking hub lubrication level
• Vinyl Cover fits over the bearing buddy to contain excess grease
• Many users tend to overfill, and, during travel the excess grease can be thrown onto tires and wheels
• If excess grease accumulates inside the bra, periodically clean it out
• Size: 3.8" x 8.7" x 1.6"
• Outer Diameter: 2-1/8"
• Weight: 8 oz.
MADE IN THE USA
-
Choose the product options first
Commonly used on Trailer Spring Hangers
MADE IN CHINA SKU# 715063
-
Choose the product options first
Includes;
(2) 9/16" x 3.00" Bolts # H509-03.00
(2) 9/16" - 12 Nuts # HN5-09 -
Choose the product options first
Fits Most Standard Size Trailer Winch Stand U-Bolts
MADE IN CHINA SKU# 715061
-
Choose the product options first
For More Trailer Carriage Bolt Sizes - See FASTENERS
MADE IN TAIWAN SKU# 701199
-
Choose the product options first
-
7% less
-
-
Choose the product options first
-
8% less
-
-
Choose the product options first
-
Choose the product options first
-
8% less
-
-
Choose the product options first
-
29% off
-