Engine Care

Mobil®Super®
Full Synthetic Oil For Gasoline Engines
• Outstanding Protection For Vehicles Of All Ages
• High Temperature Protection For Long Engine Life
• Prevents Breakdown and Extend Engine Life
• Protect Against Wear
• Combat Sludge and Deposits
• Protect in High Engine Temperatures

Meets or exceeds the requirements of:
ILSAC GF-5 - API SN,SM,SL,SJ
• Ford WSS-M2C946-A
• Ford WSS-M2C949-A

• Always check your owner’s manual when choosing a Full Synthetic Motor Oil.

Has the following builder approvals:
• GM dexos 1™ License No. D10031GC015

Is reccommended by ExxonMobil for use in applications requiring:
• GM 6094M

AMERICAN PETROLEUM INSTITUTE CERTIFIED - LIMITED WARRANTY

 MADE IN THE USA

 This automotive oil drain pan is a great way to save money and the environment. The 7-qt. capacity makes it great for changing the Vehicle's oil.

SEA FOAM® SINCE 1942 *HAZ-MAT SHIPPING

AUTO - MARINE - FLEET
Cars, Trucks, Boats, Tractors, Snowmobiles, Airboats, Outboards, Inboards, Snowblowers, Lawnmowers, Chainsaws, Motorcycles and Small Engines.

A Petroleum based product for use in all gasoline and diesel type engines, both 2-cycle and 4 cycle engines. Sea Foam can be used continuously in all fuels for cleaning or preventative maintenance. Cleaner engines generally produce fewer emissions.

OXYGEN SENSOR SAFE - USE EVERY 2,000 TO 5,000 MILES FOR MAINTENANCE
• 16 Fluid Ounces
• For Use In Gas and Diesel Engines, Gas Ethonal Blends & Biodiesel Blends
• For 2 Cycle & 4 Cycle
• For Use in Oil (Injector & Induction Cleaning Machines)
• Internal Engine Use Only
• Clean Injectors
• Clean Carb Jets
• Stabilize Fuels
• Control Moisture in Fuels
• Quiet Noisy Lifters
• Clean Deposits
• Add Lubricity To Fuel
• Lube Upper Cylinders
• De-Ice & Anti-Gel
• Works and Performs Quickly
• Helps Control Moisture in Fuel Tanks
• Cleans Dirty Engine Parts Internally
• Helps Remove Gum, Varnish & Deposits
• Helps Stabilize and Condition Fuels for Engine Storage
• Helps Reduce Hesitations and Rough Idle Due to Deposit Build Up

WHEN ADDED TO CRANKCASE (OIL) HELPS;
• Quiet Noisy Lifters
• Cleans Dirty Parts Due To deposit Build Up
• One Pint of Sea Foam Will Treat 16 Quarts of Oil (Use 1 Oz. Per Quart)
• For Use In All Motor Oils, Including Synthetic.
• Can Be Used Befor or After Oil Change (When Oil Becomes Dirty, Change Oil)

WHEN ADDED TO GAS OR DIESEL FUEL TANKS HELPS;
• Clean Fuel Injectors & Carb Jets Due to Deposit Build Up
• Control Moisture in Fuels
• Conditions Diesel Fuels, De-Ice & Anti-Gel
• Lube Upper Cylinders
• Stabilize Fuels (Use 1 Oz. Per Gallon on All Types of Gas & Diesel Engines, Including Oil-Injected Gas 2-Cycle Engines)

WHEN USED IN SMALL (2-CYCLE OR 4-CYCLE) ENGINES HELPS;
• Clean Fuel Injectors & Carb Jets Due to Deposit Build Up
• Control Moisture in Fuels
• Restores Power Lost Due to Deposit Build Up
• Smooth Rough Idle Due to Deposit Build Up
• Stabilize Fuels (Use 1 Oz. Per Gallon on All 4-Cycle Engine Fuel & All 2-Cycle Engine Fuel) (Use 2 Oz. Per Gallon on All 2-Cycle Pre-Mixed • • Fuel, Adding More to Clean and Less to Maintain.)
• Does Not Replace Oil
• Use Continuously

FOR TUNE-UPS OF SMALL ENGINES;
• Slowly Induce SEA FOAM® Direct Into Fuel Line or Air Intake System While Engine is Running.
• Stop and Let Soak For 5 Minutes
• Restart Engine to Clear Extreme Exhaust.
• Repeat as Needed

TO STORE AND FOG ENGINES;
• Slowly Induce SEA FOAM® Into Air Intake System & Spark Plug Holes, Saturating Internal Parts.

WHEN USED IN FUEL LINE, VACUUM OR INDUCTION SYSTEMS HELPS;
• Clean Intake Valves & Pistons Due to Deposit Build Up
• Helps Reduce Hesitations and Rough Idle Due to Deposit Build Up
• Restore Power & Pick-Up Lost Due to Deposit Build Up
• Clean Throttle Plate Due to Deposit Build Up
The safest most effective way to induce SEA FOAM® into the top of engine without professional assistance is to use SEA FOAM® SPRAY TOP ENGINE CLEANER (Sold Separately) and is not for use with diesel air intake systems. IMPORTANT: Only A Professional Certified Technician Should Use the Vacuum Line Method as it is Imperative That The Technician Use a Vacuume Line that Safetly Feeds All Cyinders, as This Varies With Every Engine.
• FOR INJECTOR CLEANING MACHINES, USE 50% SEA FOAM®/ 50% FUEL
• FOR USE IN INDUCTION CLEANING MACHINES, USE AS DIRECTED
• USE PRIME DIESEL FUEL FILTERS WITH SEA FOAM FOR BEST RESULTS TO HELP CLEAN INJECTORS
• SAFE TO USE SEA FOAM MOTOR TREATMENT WITH A HIGHER RATIO FUEL FOR CLEANING
• A RATIO OF 50% SEA FOAM AND 50% FUEL MAXIMUM

DANGER: FLAMMABLE, HARMFUL IF SWALLOWED. KEEP OUT OF REACH OF CHILDREN. Contains Petroleum Distillates. USE WITH ADEQUATE VENTILATION. Avoid contact with skin or repeated breathing of vapor. Do not get in eyes. If in eyes, flush with water and see physician, do not induce vomiting. Use in accordance to local, State and Federal Regulations.

GUARANTEE; SEA FOAM® IS SOLD ON THE BASIS OF - YOUR MONEY'S WORTH OR YOUR MONEY BACK AT WWW.SEAFOAMSALES.COM

Complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road equipment engines. E.P.A. Registered.

MADE IN THE USA

Spectrol API SN/ILSAC GF-5
Full Synthetic Passenger Car Crankcase Oils

Description:
• Spectrol API SN/ILSAC GF-5 Full Synthetic passenger car crankcase oils are premium quality oils
formulated for gasoline engines using highly refined paraffinic base oils, synthetic base oils and carefully
selected additives approved for GF-5, resource conserving. It provides superior thermal and oxidation
stability, corrosion and valve train-wear protections, and prevents the formation and accumulation of
deposit and sludge. GF-5 goes above and beyond GF-4 with new focuses on engine cleanliness,
phosphorous retention, and increased fuel efficiency. Spectrol API SN/ILSAC GF-5 Full Synthetic meets
the latest performance requirement of ILSAC GF-5 and API SN.

Typical Applications:
• Spectrol API SN/ILSAC GF-5 Full Synthetic passenger car crankcase oils are acceptable for use in
passenger cars, and light-duty trucks and may be recommended for the following uses: SM, SL, and SJ
oils.
• When ILSAC GF-5 and GF-4 oils are required.
• Always check your owner’s manual when choosing a Full Synthetic Motor Oil.

Typical Physical Properties:

 MADE IN THE USA

BUY MORE, SAVE MORE
Sold Each or By The Case

AIRBOAT INFO: 15W-40 Full Synthetic Motor Oil - Used For Cadillac 500 & Big Block Airboat Engines.
This is the exact OEM's correct type of oil to use on Cadillac 500 V-8 airboat engines. 15W-40 or (40 straight outside cold temperature zones) is needed to keep these engines running properly. Consumers ignoring the owner's manual reccomendations or using any lower of a viscosity oil is taking a huge risk of major engine problems, not to mention costly engine repairs.

Mobil Delvac MX 15W-40
Extra High Performance Diesel Engine Oil

Product Description
Mobil Delvac MX 15W-40 is an extra high performance diesel engine oil that provides excellent lubrication of today's diesel engines promoting extended engine life. As a result, this product meets or exceeds the specifications of virtually all major European and American engine manufacturers. This extra high performance has been proven in the field in a wide variety of industries, applications, and mixed fleets.

The advanced chemistry of this product provides outstanding performance in both modern, demanding low-emission diesel engines and older diesel engines operating on low or high sulphur fuel. Mobil Delvac MX 15W-40 combines a blend of high performance base stocks with a progressive additive system to provide superior control of oil thickening due to soot build-up and high temperatures as well as outstanding resistance to oxidation, corrosion, and high temperature deposits.

Features and Benefits
High output, low emission diesel engines significantly increase the demands on engine lubricants. Tighter engine designs reduce oil consumption, resulting in less fresh oil make-up to replenish depleted additives. Top piston fire rings are located higher on the piston bringing the oil film closer to the combustion chamber where higher temperatures increase thermal stress on the lubricant. Increased fuel injector pressure and retarded timing improve fuel burn efficiency, but also increase engine temperatures and increase soot loads. Mobil Delvac MX 15W-40 is formulated from high performance base oils and a superior balanced additive system to provide optimum engine performance in modern diesel and gasoline engines as well as older models. The key benefits include:

Features Advantages and Potential Benefits
High thermal and oxidation stability Reduced sludge build-up, deposits and viscosity increase
TBN reserves Deposit control and acid neutralisation
Stay-in-grade shear stability Wear protection and viscosity control
Advanced detergency/dispersancy Cleaner engines and longer component life
Improved soot handling Improved viscosity control and used oil pumpability
Excellent low temperature properties Start-up wear protection
Component compatibility Longer gasket and seal life
Meets demanding specifications of key OEMs One engine oil for mixed fleet operations

Applications
Recommended by ExxonMobil for use in:

Naturally aspirated and turbo-charged diesel powered equipment from leading Japanese, European, and American manufacturers
On-highway light and heavy-duty trucking
Off-highway industries including: construction, mining, quarrying, and agriculture
Mixed fleet applications

MADE IN THE USA